Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

need info on p13 for a h22

Old 01-31-2005, 11:53 PM
  #1  
1.0 BAR
Thread Starter
 
Join Date: Apr 2003
Posts: 467
Default need info on p13 for a h22

this isn't necessarily a turbo engine managment question, but i figured i would get a good response over here. I am helping my friend chip his p13 ecu for his all motor h22 and i'm having trouble finding a program that I can use to tune it with. I searched and uberdata won't work with a p13. Will crome work? If not what options does he have other than buying a p72 or something?
sohc_mshue is offline  
Old 02-01-2005, 09:06 AM
  #2  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re:need info on p13 for a h22

I think Crome is starting to support some P13 stuff.

You should check out their forum on the PGMFI boards.

The only other one I know that does heavy P13 stuff is Smooth1 aka HRtuning who is the creator of Neptune.
Chris Harris is offline  
Old 02-01-2005, 12:39 PM
  #3  
1.0 BAR
Thread Starter
 
Join Date: Apr 2003
Posts: 467
Default Re:need info on p13 for a h22

yea i posted over in the crome forum on pgmfi. Hopefully i'll get a good response. Do you have to do anything different when chipping them?
sohc_mshue is offline  
Old 02-01-2005, 01:41 PM
  #4  
3.0 BAR
 
Join Date: Apr 2003
Posts: 11,059
Default Re:need info on p13 for a h22

just get a p72 or add iab's to a p28. i tried using a p13 and messing around with different stuff and didn't get far. blundar posted a very good h22 stock basemap based off of the uberdata p72 code. i used it on a buddy's h22 with a p28 with iab's added with some pretty good results.
projekteg is offline  
Old 02-01-2005, 01:51 PM
  #5  
1.0 BAR
Thread Starter
 
Join Date: Apr 2003
Posts: 467
Default Re:need info on p13 for a h22

nice. Did you use those maps on an all motor h22 or turbo? I'm looking for the closest to stock maps I can find for his car because right now it is basically just a stock h22 in an accord with an intake. If not I can always tune it a little with my wideband. Also are the IAB's absolutely necessary? He sais he doesn't even have them hooked up right now. He sais apparantely they aren't really needed. Personally I don't know anything about them because i'm a d series guy.
sohc_mshue is offline  
Old 02-01-2005, 01:57 PM
  #6  
3.0 BAR
 
Join Date: Apr 2003
Posts: 11,059
Default Re:need info on p13 for a h22

Originally Posted by sohc_mshue
nice. Did you use those maps on an all motor h22 or turbo? I'm looking for the closest to stock maps I can find for his car because right now it is basically just a stock h22 in an accord with an intake. If not I can always tune it a little with my wideband. Also are the IAB's absolutely necessary? He sais he doesn't even have them hooked up right now. He sais apparantely they aren't really needed. Personally I don't know anything about them because i'm a d series guy.
no, the iab's aren't neccessary, so you could use any vtec ecu to run the engine, that will make it a little easier to find an ecu. and yes, the h22 map was for a stock h22 with 340cc injectors that blundar dyno tuned. i made a boost map out of it with great success and have also used it on a stock h22 and it ran great.
projekteg is offline  
Old 02-01-2005, 02:48 PM
  #7  
1.0 BAR
Thread Starter
 
Join Date: Apr 2003
Posts: 467
Default Re:need info on p13 for a h22

sweet thats good to hear. I guess i'll tell him to get a p28 or something.
sohc_mshue is offline  
Old 02-01-2005, 04:13 PM
  #8  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re:need info on p13 for a h22

Originally Posted by sohc_mshue
yea i posted over in the crome forum on pgmfi. Hopefully i'll get a good response. Do you have to do anything different when chipping them?
I believe they have an Eprom to desolder and replace...but not 100% sure.
Chris Harris is offline  
Old 02-02-2005, 06:17 AM
  #9  
0.0 BAR
 
Join Date: Dec 2002
Posts: 0
Default Re:need info on p13 for a h22

Originally Posted by xenocron
Originally Posted by sohc_mshue
yea i posted over in the crome forum on pgmfi. Hopefully i'll get a good response. Do you have to do anything different when chipping them?
I believe they have an Eprom to desolder and replace...but not 100% sure.
just like an obd0 ecu.
Guy-Fast is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Zeniceguycrx
Engine Management
14
01-12-2009 04:37 AM
g-wagon
Hybrid/Tech
3
05-05-2006 09:02 PM
projekteg
Turbo Parts For Sale
6
11-22-2004 09:21 AM
illmenace
Wanted
1
10-25-2004 10:00 PM
Princess
Turbo Parts For Sale
10
06-07-2004 11:32 PM


Thread Tools
Search this Thread
Quick Reply: need info on p13 for a h22


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.