Need info
 

Help! I need to know how and what items I would need to convert a DX wire harness so that I can use it for my B18A1 in my CRX HF. Or should I just buy an HF harness for the sake of the trouble...?

Re:Need info
 

Run oins A1, A3, A5, A7 to injectors 1 - 4 respectively. You have two yellow/black wires that come off your injectors, run those to your newly aquired injector resistor box. There will be 4 identical wires that come out of the box, and another "off" colored wire (I don't use specifics because it depends on if you get a Civic or Integra box). Run those 4 identical wires to your injectors. If they are no identical wires, hit up google for the pinout as I can't remember off the top of my head what color is the input.

Snip wires C1, and C2 and reconnect them at B10, and B12 respectively.

The empty pins, C1, and C2 run into your engine bay to you TDC, and CYP sensor wires (blue/yel, blue/grn) off of your, now, 7 wire distributor.

Snip and swap your two outide TPS wires. Green to Yellow, Yellow to Green.

Re:Need info
 

Thanks for the info. I'm gonna try that.