Need help. N/A Frenky VTEC fuel problem
 

I know that it is not a turbo setup but it is making me crazy so i need help if any one is up for a challenge.
I made a Frenky engine b20 with b16 head. The car runs nice until it hits VTEC, then A/F goes way to rich 10 even high 9/1 A/F.
I changed, sparks, ECU, ignition, used hondata loging, checked every sensor and every thing is OK. FP regulator is OK. I do not know what could be the problem.
Me and my mehanic changed like 90 of the engine and nothing.

Any ideas?

Re: Need help. N/A Frenky VTEC fuel problem
 

Are you able to change the maps?

Re: Need help. N/A Frenky VTEC fuel problem
 

do you have the cam gears set correctly.i dont know much about the b20 vtec builds,but ive seen alot of posts about needing adjustible cam gears to get the cam timming correct.

Re: Need help. N/A Frenky VTEC fuel problem
 

You mentioned Hondata, are you using an appropriate map? Id just adjust the high cam maps to where they need to be. Then if it turns out that the high cam fueling is drastically lower than the low cam maps, there's something mechanical going on.

Re: Need help. N/A Frenky VTEC fuel problem
 

TNX for info. We will try with adjusting the cams.