need help with my obd0 ecu !!!!
 

I have a obd0 ecu with a removable chip. The chip says Hondata on it. I was wondering if I could get a turboedit chip aleady set? so that I can install my turbo. I also need to know will the chip go right into my ECU or will have to add more parts or if anybody has a OBD0 ECU already chipped with turboedit that they are willing to sell or trade. any help is greatly appreciated. Thanks! :y

Re: need help with my obd0 ecu !!!!
 

Take a picture of the chip and post it.I had a buddy over the other night who has a S100 Hondata in his Teg and I burned a chip for it only to find upon opening it that Hondata uses a small chip/socket and is not compatible with common chips used for Turbo Edit,Crome etc. :3

Re: need help with my obd0 ecu !!!!
 

28 pin socket

Re: need help with my obd0 ecu !!!!
 

You are good to go then.Get a chip and a burner and you can make a basemap to get started with.Xenocron has all the stuff you need and has a download for making basemaps.

http://-------------/downloads.php?page=basemapper

Re: need help with my obd0 ecu !!!!
 

is there a way i can buy a chip from someone . my funds are low . cost of burner to high . i got a stock b16a with 280 injectors.

Re: need help with my obd0 ecu !!!!
 

Your NA right?You sure on the 280cc injectors as almost all Honda OE are 240cc.Hit up the link i put up he will probably make you a chip.Do you just need a stock program basically burned on a chip?Lots of us here could do that for you.

Re: need help with my obd0 ecu !!!!
 

injectors from 97 h22a4, 280cc . got all the thing to go turbo . money is short . got to get a new house build . i live in mississippi.