Need help on hooking up the resister pack.
 

I need help hooking up the resister pack, dont understand the others threads out there.
I got my resister pack off an ls integra 90".

I cut off the wires where there are 4 red w/ black stripes. and 1 yellow with black.

On my car, 93' civc si. the plug that is not plugged up to anything, it has I think all yellow w/ black stripes wires and 1 red with black stripe wire.

What do i hook up to what? Help!

I plan on hooking up DSM 450cc injectors. Also can someone send me a uberdata preset map for ls turbo. I need one i can start off from and tune my car from, planning on running 10psi.

Re:Need help on hooking up the resister pack.
 

the 4 red wires are the ones that go to the injector gournds and they all ground to the one yellow wire to the chasis.

and that plug on the drivers side that has all the wires go into to is where alost of the engine sensors ground to and the injectors. you can tap the negitives there just make sure you get hte right wires and tone them out with a multimeter. ill see if i can get a picture or 2 on the last install i did.

Re:Need help on hooking up the resister pack.
 

I always thought that was a power wire, and the coloured wires on the injectors are grounds that are open and closed by the ecu. ?

Re:Need help on hooking up the resister pack.
 

there is only 5 wires and 4 injectors. the 4 wires that are the same color are to the yellow/black wire (regardless if its a + or neg) and all go to one point. so yeah it could be backsideswitching i havent looked into it enough to know for sure seeingi have had no need to. :-\

Re:Need help on hooking up the resister pack.
 

that's right.
you can wire the 4 similiar wires from the resistor to each yellow/black wire of the injectors and, the four cut wires from the injectors can be combined and wired into the 5th wire from the resistor.

Re:Need help on hooking up the resister pack.
 

heres how u install the box.

find the connector plug that has the 8 yellow/blk stripe wires going into it.

if u look closely u will see that four of the wires are light yellow and the other four are dark yellow.

cut all 4 LIGHT yellow wires and connect each to a seperate black wire on the resistor box.

now take the red wire coming from the box and tap into one of the remainding four DARKER yellow wires. DO NOT CUT IT.

THE cap on the end of the plug will make the connection to the remainding wires.

thats it your done, pat your self on the back and payal my 5 buxx, so i can buy some mcdonalds ;D

Re:Need help on hooking up the resister pack.
 

http://www.hondata.com/techinjectorwiring.html
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Need help on hooking up the resister pack.
 

damn boost, now i wont get 5 buxx ::)

Re:Need help on hooking up the resister pack.
 

Maybe not, but I will. :P

I've -----d that link around so many times......
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote