NEED help with FUEL
aight i got a 91 integra...b18a1, T3, SMC, fuelpump...i need to know what i need to run 450cc injectors, do i need to modify anything to run these. i hear all this stuff about lowering the voltage to the injectors using resistors, but do i need that???, do u think maybe the SMC will allow me to run them with no other mods???
|
Re:NEED help with FUEL
Yes you need to run resistors. Either the radio Shack (10 ohm) resistiors, or a resistor pack out of an older crx, civic, or integra. If you don't, you will damage the ecu.
|
Re:NEED help with FUEL
"or a resistor pack out of an older crx, civic, or integra. "
out of what year, and what computer??? |
Re:NEED help with FUEL
88-91 Si
|
Re:NEED help with FUEL
a resistor pack out of a 88-91 si, is it inside the ecu? or is it outside just wired into the injector circuit???and what does it look like???
|
Re:NEED help with FUEL
outside just wired into the injector circuit __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:NEED help with FUEL
yo i went on ebay....saw a picture of one that came out a 90-91 integra pr4..????thats what i have, do i still need a different one???
|
Re:NEED help with FUEL
88-91 Civic/Integra already have resistor boxes on the driver's shock tower. You should be set to plug and play with those injectors, bro.
FYI, the last resistor box I checked came out 6.4 ohms, not 10. HTH... and TLshizz, you got your lol. <-- Joseph |
Re:NEED help with FUEL
good ---- thanx a lot!!!
|
Re:NEED help with FUEL
i thought a 91 integra had a resister box on it..?? somebody correct me if I am wrong..
resistor pack out of an older crx, civic, or integra |
All times are GMT -5. The time now is 12:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands