is my timing ok 19 degree for 16 psi (d16z6)
 

Im running a d16z6 with
je-srp piston 9 to 1
eagle rods
compression check showed 185 psi across all 4
t3 turbine with compressor 60 a/r with 3" inlet.

running 16 psi and 19 degrees timing . is this ok or too much

i tuned it myself with uberdata and a plx m-500 wireless datalogger.
the fuel is fine, just wondering on my timing.
the last colum on my hi cam map is at 19 degrees for 16 psi.

Re: is my timing ok 19 degree for 16 psi (d16z6)
 

depends on some pieces of the turbo setup, but for a base start, id say no.

id say 12psi should sit around 15degrees to start, maybe 13-14 for 16psi.

Re: is my timing ok 19 degree for 16 psi (d16z6)
 

I might even go a hair below that.

Setups change tune around a bit, but 15 deg at 12 psi might start some mild pinging once the engine gets heatsoaked.