ATX45

i just got a msd 6al and it came with a 2 step and a little red box can anyone tell me what this is for i got a trade for some stuff i had and the guy said it came with everything but the coil i found a diagram that shows how to connect it directly to the dizzy without the external coil anyone know if thats ok to do

ATX45

is this correct if i connect without the coil

leed

Im sure you dont care, and I could be wrong. But here's my exp. w/ aftermarket ignition box's.

I installed a Crane HI6 w/ thier super duper bad *** coil. Every thing was fine, or so it seemed. A few months ago I was upping my boost to 18psi, and ended up having to run a .024ish gap to keep the fire lit w/o having ignition misfires. Any boost past 18psi, it would break up pretty bad regardless of gap.
I ended up taking the whole system out, and returning it to stock. I then upped the boost to 20psi. The end result was supprising, I have no ignition misfires w/ more gap. I think a healthy maintained OEM ignition is the way to go.
Also of note, is when I am timing my car at idle, the ignition no longler jumps around a few degree's like it did w/ the HI6.

Good luck w/ it.

Dave

ATX45

thanx for the info based on what you said i probably wont install it then i just have it laying around been trying to sell it so i figured i install it but as of right now my ignition system is working fine so ill probably just leave it aloneif it aint broke dont fix it i guess heh