motorola 2.5bar, starts and then dies
 

The setup is a z6 vitara build. It's been running on a gm 3bar find. But thing is, it's a borrowed map sensor. Now he plugged in a motorola 2.5 bar.

I made a new bin, scaled everything correctly and selected the 2.5bar in adv boost tools.

The car will idle fine, and after about 10-15 seconds, it will go lean and die. It throws a code 5, map sensor.

It's wired correctly and starts up perfectly.

I dont' know whats going on? The only thing I could see that's bad is either I burned out the map sensor when i soldered the wires on there or the vacuum line that's going to the map sensor isn't completely sealing around the fitting and has a slight leak. But it idles perfect for 10-15 seconds. :S

Re: motorola 2.5bar, starts and then dies
 

what does it read when you turn the key to acc ?


how much vac/boost ?

my read like 22psi. lol

Re: motorola 2.5bar, starts and then dies
 

It was reading -20 in/hg

Re: motorola 2.5bar, starts and then dies
 

i couldnt figure out my either.

i changed the wires around every which way but still couldnt get it to work.


all i did was, replaced the moto 2.5 sensor and everything worked as it should.
sorry i couldnt be of more help. :-\

Re: motorola 2.5bar, starts and then dies
 

Bump for more help.

We had to swap back to a stock map to get his ---- running. 11psi sucks :3 We want 22 :y >:D

Re: motorola 2.5bar, starts and then dies
 

I would say the sensor is bad if you know it's wired up correctly and it's still throwing a code.

I can send you my bin if you want to try it, it's a z6 vitara build on 660's w/ the same map sensor.

Re: motorola 2.5bar, starts and then dies
 

I'd appreciate it. If anything, it should run a LITTLE lean.

email is
d112crzyATmsn.com

Re: motorola 2.5bar, starts and then dies
 

Emailed you.

Re: motorola 2.5bar, starts and then dies
 

what version of crome was that made with?

Re: motorola 2.5bar, starts and then dies
 

I had the same prob with the moto 2.5bar, I went through a coupple sensors before saying ---- it, and going back to the stocker. I'll just man up and buy the gm3bar.