Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

moates burners

Old 07-16-2006, 07:06 PM
  #1  
3.0 BAR
Thread Starter
 
Join Date: Jul 2006
Posts: 2,349
Default moates burners

OK i think im ready to buy a rom burner and from what i have been reading moates is the best for hondas. Ijust wnated to know which version do i need will this one work.
http://www.moates.net/product_thumb....pg&w=150&h=101
thanks in advance ooo what kind of chips and socket do i need i will be programming a pm6 for my crx. i want to make my ECU good for V-TEC and turbo if that is posible and i will be using TURBO-EDIT!
SDRAWKCAB is offline  
Old 07-16-2006, 07:30 PM
  #2  
3.0 BAR
Thread Starter
 
Join Date: Jul 2006
Posts: 2,349
Default Re: moates burners

i just downloaded the turbo edit to look at the fuel map but it requires a .DLL MSVBVM60.DLL was not found do i have to have another program or do i have to have a rom burner installed?
SDRAWKCAB is offline  
Old 07-16-2006, 11:03 PM
  #3  
3.0 BAR
Thread Starter
 
Join Date: Jul 2006
Posts: 2,349
Default Re: moates burners

ok i missunderstand I have a d15 crx 90 with a si intake swap i changed over to the pm6 91 i will be turboing my car soon and i whant to know why turbo edit will not open on my comp its tossing a .dll code . another ? i wanted to know whats a good cheap chip and is the moates burner any good. The current motor isnt V-tec but i have a d15B V-TEC with no ecu and i wanted to know if i could use the ecu if i backdated the motor. and just use rpm window switch. sorry i may have asked a stupid ? but im new at this .
SDRAWKCAB is offline  
Old 07-16-2006, 11:52 PM
  #4  
3.0 BAR
Thread Starter
 
Join Date: Jul 2006
Posts: 2,349
Default Re: moates burners

ok i found what i was lookin for about v-tec but i still need to know what chip do i need to use, socket and will the moates burner work its a 91 pm6 i found the burner real cheap. WHY will turbo edit not open has any one else hade this problem i just downloaded it yesterday and it wount open it tosses a .dll code
SDRAWKCAB is offline  
Old 07-17-2006, 11:23 AM
  #5  
3.0 BAR
Thread Starter
 
Join Date: Jul 2006
Posts: 2,349
Default Re: moates burners

YOU KNOW WHAT im just gonna use a ------ hack because I cant figure how to open turbo edit and I feal like a complete dumbass. Its probley somtin really simple but whatever.I came on here not knowing anything about ecus and fuel management but its the blanks im trying to fill in now. IV been tring to learn some new ---- but whatever. Im just gonna take the easy wat out and use a AFC. Yes i know they suck! Thanks for the help.
SDRAWKCAB is offline  
Old 07-17-2006, 12:05 PM
  #6  
0.0 BAR
 
Join Date: Apr 2004
Posts: 0
Default Re: moates burners

The fact that your questions have been answered 80 bajillion times already, added to the gayness of your avatar makes people not want to help you. Moates is a good burner, the best IMHO.

Get your socket and chips here: http://www.-------------/products.php?page=components SST's are good and cheap.

For the .DLL problem. I dunno. did you install the entire program, or just an updated .EXE? D/L 2.5.2 then copy the newest updated .EXE into the 2.5.2 folder.

As for deciding to use the hack, no offense but you sound like a little bitch. We weren't born knowing how to chip ecu's and get turboedit to work. We searched, read, read, read, read some more and figured it out.
idiot-stick is offline  
Old 07-17-2006, 12:49 PM
  #7  
3.0 BAR
Thread Starter
 
Join Date: Jul 2006
Posts: 2,349
Default Re: moates burners

ok someone that actually understood my ? sorry for being a idiot but i get pist when i cant figure something out. i downloaded this version of turbo edit TurboEDIT2.5.2.exe and I down loaded the file it lookin for but it still says the same thing, mabe its my computer. im gonna download it on my freinds computer. i have been reading and i havnt found and prob with a .dll file but like i said im new at this. oooo and i changed my pic, thats the only picture i had on my comp, its from like 4 years ago. sorry for being such a spaz.
SDRAWKCAB is offline  
Old 07-17-2006, 12:58 PM
  #8  
0.0 BAR
 
Join Date: Apr 2004
Posts: 0
Default Re: moates burners

idiot-stick is offline  
Old 07-17-2006, 01:19 PM
  #9  
3.0 BAR
Thread Starter
 
Join Date: Jul 2006
Posts: 2,349
Default Re: moates burners

YOU SIR ARE THE ------- MAN!!! thanks alot i tied what they said but my comp is a pice of ---- so i went to my friends house and used his labtop. TE is ------ awsome u can cange a lot of ----. THANKS for the help and like I said I try not to be such a noob next time I ask a question. But this is a learning process for me and im really happy im about to start turboing my crx im waiting for the rest of the parts.
SDRAWKCAB is offline  
Old 07-17-2006, 01:32 PM
  #10  
0.0 BAR
 
Join Date: Apr 2004
Posts: 0
Default Re: moates burners

np good luck
idiot-stick is offline  

Thread Tools
Search this Thread
Quick Reply: moates burners


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.