Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

maxrev installed today w/hack,very ruff!help

Thread Tools
 
Search this Thread
 
Old Dec 28, 2003 | 05:44 PM
  #1  
bigruss3hit's Avatar
Thread Starter
0.0 BAR
 
Joined: Dec 2003
Posts: 2
Default maxrev installed today w/hack,very ruff!help

2001 gsr,only getting4lbs boost. 450ccinj, -18@1000,-25@2000,-25@3000,-25@4000,-25@5000,-20@6000,-20@7000 fuel pressure 43psi stable/50psi load....stoichmeter says rich...but egt goes over 1300* if I lean it out....No CEL problems ,stock bottom end makes me nervous to lean it out & run high temps like1450* 93 octane 8*retard on timing?
Old Dec 28, 2003 | 06:15 PM
  #2  
Semnos's Avatar
3.0 BAR
 
Joined: Dec 2002
Posts: 3,828
Default Re:maxrev installed today w/hack,very ruff!help

you are running too rich try to start at -35.
Old Dec 28, 2003 | 11:21 PM
  #4  
racerex's Avatar
1.5 BAR
 
Joined: Jun 2003
Posts: 675
Default Re:maxrev installed today w/hack,very ruff!help

Whoa!!! You may be afraid of the damage you can do running lean, but running that rich you can do plenty of damage as well. Lean it out!!
Old Dec 28, 2003 | 11:44 PM
  #5  
miss-piggy's Avatar
0.0 BAR
 
Joined: Sep 2003
Posts: 0
Default Re:maxrev installed today w/hack,very ruff!help

-35 wouldnt be a bad starting place. -35 and at the end richen it up to maybe -32/30.
Old Dec 29, 2003 | 07:09 PM
  #6  
bigruss3hit's Avatar
Thread Starter
0.0 BAR
 
Joined: Dec 2003
Posts: 2
Default Re:maxrev installed today w/hack,very ruff!help

could'nt make any boost....so now we have pulled the turbo & tommorrow putting used t3 off ford murker on 2c if the turbo is problem?Oil was dripping out of compressor,when I pulled off charge pipe so we think a seal is blown? Also I purchased injectors w/beige tops that the salvage yard insist is turbo eclipse,they did'nt work w/10w/10ohm....I bought blue top @ they fired right up....Now the salvage yard dont want 2 take them back! Any1 every seen DSM beige inj?
Old Dec 29, 2003 | 09:04 PM
  #7  
HMT-Admin's Avatar
Administrator
 
Joined: Dec 2002
Posts: 13,988
Default Re:maxrev installed today w/hack,very ruff!help

beige top dsm injectors are non-turbo 4g63 injectors I believe.

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fastcivicboy
Turbo Parts For Sale
3
Jun 29, 2004 09:23 PM
bipedbear
Turbo Parts For Sale
1
Dec 22, 2003 12:31 AM
specie
Turbo Parts For Sale
8
Aug 28, 2003 10:28 AM
88crxsivtec
Turbo Parts For Sale
0
Mar 28, 2003 12:55 PM
ForcedSol
Forced Induction
4
Feb 13, 2003 02:28 PM




All times are GMT -5. The time now is 04:13 AM.