HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   maf to map? (https://www.homemadeturbo.com/engine-management-10/maf-map-91066/)

cornfuzed 04-15-2008 04:32 PM

Re: maf to map?
 

Originally Posted by ratcityrex

no, I would put the maf in the charge pipes, not the intake. charge pipes go in between your turbo and your throtle body.

but wouldn't the maf not be able to read the boost to compensate for it and make it run lean as ---- till it blows?
also how bad are fmu's?

-SKUM- 04-15-2008 07:16 PM

Re: maf to map?
 
all I know is alot of the nissan guys that are n/a, put it in the charge pipe side and it seems to work out tits.

cornfuzed 04-15-2008 07:30 PM

Re: maf to map?
 

Originally Posted by ratcityrex
all I know is alot of the nissan guys that are n/a, put it in the charge pipe side and it seems to work out tits.

cool, i appriciate the help and will be sure to make a thread when i get the build started (hoping to start arround june and be finished in 1 weekend as the car is his dd)

also did the guys get their ecu chipped? as there is not chip out there for the aveo and i don't know if it can be re programed

HMTguy 04-15-2008 08:14 PM

Re: maf to map?
 
You need to do some damn research on your own. You make a thread about every single aspect of this turbo kit asking how to do it :l

Next threads from you:

How do I install DSM 450's in an Aveo?
Is 2" exhaust too small?
CAR WON'T START!@!
SHE RUNS
BLEW THE ENGINE ON MY FRIEND'S CAR because I'm an idiot

cornfuzed 04-15-2008 08:28 PM

Re: maf to map?
 
<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/rz1xEu52UbM...</param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/rz1xEu52UbM&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>

chill

i was just asking because this is the first i have heard of using a maf on a boosted engine
so i was asking about the ecu big ------- deal

HMTguy 04-15-2008 08:35 PM

Re: maf to map?
 
Dumbass doesn't even know we don't enable embedding videos... ::)

cornfuzed 04-15-2008 08:37 PM

Re: maf to map?
 

Originally Posted by jagojon3
Dumbass doesn't even know we don't enable embedding videos... ::)

well i should just kill myself then right?

seriously dude lighten the ---- up

b18. 04-15-2008 08:50 PM

Re: maf to map?
 

Originally Posted by cornfuzed
i should just kill myself.

Yes.

Yes you should.

Ntrain2k 04-15-2008 09:09 PM

Re: maf to map?
 
#1: You have to place the maf between the turbo and the intake so it can read the Mass Air Flow (hence MAF).
#2: If you are going to run larger injecotrs, the MAF has to be calibrated for the larger injectors.
#3: In order to properly tune this without going stand alone, your going to need to be able to modify the computers programming.
#4: Since your friend does not like to change oil, even if you accomplish this and have it tuned properly, it will die soon.
#5: Your friend will blame you for the engine dying, and you will lose said friend.
#6: Fist yourself.


That is all.

Cray91 04-16-2008 11:37 PM

Re: maf to map?
 

Originally Posted by cornfuzed


i was just asking because this is the first i have heard of using a maf on a boosted engine
so i was asking about the ecu big ------- deal

You really are clueless then. Just go to a forum that deals with performance on a type of car that uses a MAF, like Nissan, and it will most likely be a sticky in their forums. "Boosting with a MAF"


All times are GMT -5. The time now is 01:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands