Look at my lambda log
 

This is just with scaling and then slighty tweaking the entire vaccuum portion of the map at the same time. Sometimes it'll run around 14.7, sometimes around 16. I am running closed loop obviously. When I run open loop do you think the values will be closer to 14.7 all over?

I am running a max of 6 psi right now. I didn't even have to tune the boost portion of the map at all, it looks pretty good to me. Any input/suggestions?

http://img189.imageshack.us/img189/2...mbdalog3bb.jpg

Re: Look at my lambda log
 

That 16.55 will ruin your day and your motor. I would also remove 4% from you 10.27

Re: Look at my lambda log
 

I don't see a 10.27... are you referring to one of the columns?

Woops I'm retarded I see it. I'll remove 4% and see how that works out. Any changes you'd do to the N/A portion? And what group of cells would you change to fix that 16.55?

Re: Look at my lambda log
 

Did you just pull that number out of your ass?.. a 4% decrease will only bring him up a little less than half a point on his AFR.. landing him at 10.6:1.. what use is that?

If anything.. pull out 12.9%.. that will land you at a 12.1:1 AFR right there..

Re: Look at my lambda log
 

Yes out of my ass, I use 4% incriments.