Dave, I've been trying to get ahold of you all day today.. but you wont return my calls ***.. but your posting on my forum!

I need that h22 base map!

 

hes been very busy pushing his dipstick back into his motor from all the blow-by

Ohh, did I mention my S2000 blue hatch looks like chick car and I like it?

 

 

lol, thanks Steve. "dude, it smells like oil...oooo its coming outa the hood...."

Ill take this time to edit your post now.

 

Well dustin burned a chip for me last night and I am still getting the 4grand rev limit, and 2 grand idle along with a solid cell. I didnt know uberdata was so... premature so you could say? I thought all of this was pretty solid?! really wish I wouldnt have sold that stock p13 now

Any help would be appricated by anyone.

Jeff

 

Here is the Original .bin that it started on.

http://www.draglab.com/H22 base2fuel1u165r3.bin


You say 4k limit? Thats the FTL. High 2k idle when cold in normal (sorta) on some Uber bins. Let it warm up yo'

Heres the Original w/ FTL disabled, and your suggested fueling changes.


http://www.draglab.com/Original NoFT...wot U163r3.bin

Dustin, if you burn a new one for Jeff and Progstudio does that 'reprogramming xxx sector' ten times bullshit, give him a fresh 29c, or atleast verify rom-to-buffer to be sure.

 

yes, 4k limit.. Even when it warms up it still stays at 2k. Is the solid cell suppose to be normal too?

I dont know enough about this stuff to really know whats going on? is it a hardware problem or a software problem? both? The pins and the solder job you did look fine. Is it possible 2 bad burns in a row?

 

Sorry your having problems dude, long distance trouble shooting blows.

When you go key on, does the CEL ever go out? Then come back on?

Get Dustin to burn the Original .bin. If that works then burn the second one I posted.

 

it burned fine only did the reprograming sector xx once or twice (like it always does for me).

i will go find my other chips and reburn both those, Jeff i will be out and round tomarrow running some arrines (day off) so give me a call...

 

solid cel? did you put the chip in the right way?