Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE START
 

Need to learn everything from the start. I dont wanna have to rely on anyone except for advise and parts. Wanna be able to everything tuning wise to my ecu.

My car is an 88 Crx Si, obdo. Going to be running a chipped pm6 by xenocron, alreayd has the removable chip holder installed. He has a basemap burned on it for me already. I also will have a permanent Twintec digital windband installed in the car.

I really dont even know where to start explaining myself. I need to know what type of burner to buy for ease of use and simplicity and how to use it, maybe a spare chip I might need to buy for a backup.

Need to know how to tune the car, from the basemap tune to the fully tuned setup, timing and fuel. Maybe buy a cheap laptop, datalog?

Im sure there is an article or a few ones people can point me to.

I have read a few basemap articles . But I have yet to find ANYTHING on starting from SCRATCH, from first hearing about TE to being able to adjust maps and tune like no tomorrow

Sorry if this topic has been coverred, but Id like to learn myself instead of getting someone to do it everytime I change my setup. Hope someone can point me in the right direction

Thanks
-

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE START
 

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE START
 

Thanks

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE START
 

as for burner I highly recommend the moates

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE START
 

As far what? Ease of use for a beginner? Price? I dont know what nakes a good chip buner nor do I know what type or kind or brand whatever I need. All I know is I have a removable chip that xenocron sold me thats already installed and has a basemap on there

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE START
 

Im gonn have to go ahead and bump this up. Gonna check what type of chip I have in my ecu (socketed by xenocron) and hopefully someone can tell me what type of burner to get.

The code on my chip is
ATMEL
AT29C256
70PC
0408

My laptop has a USB port if it matters, this is by far the hardest part of this build for me, I need a burner that will work with my shitty laptop running windows 95 maybe 98

Id also like a starter link for DATA logging if possible

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE S
 

either a moates burn 1 or a willem enhanced, both can be found on e bay with the proper cables and software for somewhere between $40-$65

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE START
 

Moates is simple to use, no need to have a jumper wire, also it uses only a usb as a power source and transfer.

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE START
 

So you guys would agree Moates is the simplest to use and will burn the chips I have?

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE START
 

I have had a Willem, I have had a Genius, I know have a Moates Burn1. BEST BURNER I HAVE EVER USED!!!!!!!!!!

Hands Down. My Willem let me down all the time!! Moates has never left me stranded. I soon hope to have te Ostrich also.

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE S
 

Moates for the win.

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE START
 

IM IN THE SAME BOAT!!

Ive got my turbo kit all pieced out and ready to rock. But now its winter and the onyl thing I have left is learning how the hell to use TurboEdit

Ive got a chipped pm6 with an erasable chip I bought from someone, supposedly has a program on it already by xenocron

Now Ive read his guide on his website and its really not for the common person starting from scratch. Like I have noooooo idea about "stable roms" and importing and exporting and scalling maps and such.

Can someone point me in the right direction as to how to get this ---- working. Ive got as far as to download the stock PM6 bin file thing and open it and click around, really dont know what Im doing and want to learn how to tune my own car with my wideband and laptop by March like a pro

I need help, ---- honda-tech

Re: Learning TurboEdit - Chip Burning - Self Tuning HOW DO YOU DO IT FORM THE START
 

I posted this Q on PGFI.com just now aswell, it seems just starting is everyones struggling point and once you get going youre fine, I obviously cant beat this point without someone helping me. Im kinda on the same boat as you, just dont get how to run the program and what exactly Im doing when Im touching ----.

I'll post up anything I learn or is posted over there for you to, must be others that wanna learn TE but dont have the knowledge