LC-1 problem
#1
LC-1 problem
Alright, once again im having some problems. I got my wideband working correctly this morning and drove around the block real quick to have a look at my afr readings. The wideband seemed to be working properly. I pulled back in the driveway turned the car off. When i pulled up i found out i had company so i talked to my buddy for a couple of minutes. He left about 20 minutes later so i went back to the car to mess with the car again. I turn the car on and pull up the afr readings. They are bouncing around high as ----, as high as 40 to 53 Then they settle down to about 20.1 at idle. What the ---- Well then my laptop decided to die
Well i let it charge and went back outside to mess with it some more and now the damn thing wont connect. I'll launch the LC-1 program and when i try to get it to connect this little box comes up saying "no port connection". The goddamn thing is connected and i have not changed a thing since the last time i had it working.
Well i let it charge and went back outside to mess with it some more and now the damn thing wont connect. I'll launch the LC-1 program and when i try to get it to connect this little box comes up saying "no port connection". The goddamn thing is connected and i have not changed a thing since the last time i had it working.
#5
Guest
Posts: n/a
Re: LC-1 problem
Originally Posted by f***myzc
I uninstalled the Lc-1 ---- from my laptop and reinstalled it and now all i get is " connect the device and power it on "
Im about to hurl this ------- laptop and goddamn lc-1 up in a tree
Im about to hurl this ------- laptop and goddamn lc-1 up in a tree
#7
Re: LC-1 problem
i had that problem as well do this get completely out of the program and then go to logworks open it up then when it says connect to port 4 or 3 click the key to the number 2 position so the cel and all that jazz comes on and then hit connect, that always works for me itll show the sensor warming up when it gets to about 80% start the car up.
#8
Re: LC-1 problem
Originally Posted by facetuned
i had that problem as well do this get completely out of the program and then go to logworks open it up then when it says connect to port 4 or 3 click the key to the number 2 position so the cel and all that jazz comes on and then hit connect, that always works for me itll show the sensor warming up when it gets to about 80% start the car up.
#9
Re: LC-1 problem
how do you correct it? mine is the same way, also did you program your lc-1 to 0.1v=7.35afr and 3.25=22afr im having a bitch of a time programing mine this piece of ---- radio shack serial to usb convertor doesnt work for ---- or the drivers for it suck for that matter it works when it wants to, it worked fine one day now it wont? this is very frustrating i just want to get my ---- tuned
#10
Re: LC-1 problem
Hell it started working for me today go figure. I didnt even change any port settings are anything, just plugged it up and hit connect. I think all the problems i have had trying to connect is because of my ragged *** loptop. Ive got something else going on now though. Its still reading up in the high digits 50 and above. Im gonna let the car cool down and recalibrate the sensor and see what happens.