JUST PURCHASED
just purchased the BURN 1 moates rom editor with the uberdata chip kit, does the software come with the package this is what i think i need to get the car ruuning right
asking for advise and info???? |
Re:JUST PURCHASED
I dont know?
But what I do know is that you posted in the wrong forum! |
Re:JUST PURCHASED
the burn 1 isn't a 'rom editor', it's a chip programmer. the software you use to write your program is your 'rom editor' ;) it should have come with the software, if not, you can dl from www.moates.net , it's called 'tuner pro' or some ---- ???
|
Re:JUST PURCHASED
thanks for the move , i was going to go through you but i need the experience to learn to tune my own ---- sorry teg
|
Re:JUST PURCHASED
Originally Posted by THRESHOLD
thanks for the move , i was going to go through you but i need the experience to learn to tune my own ---- sorry teg
|
Re:JUST PURCHASED
is it possible to find a bin. for a bmw like the hacks on the hondas, through uberdata
|
Re:JUST PURCHASED
Originally Posted by THRESHOLD
is it possible to find a bin. for a bmw like the hacks on the hondas, through uberdata
|
Re:JUST PURCHASED
ok thanks
|
Re:JUST PURCHASED
if i use moates to create a rom then i would need an emulator to edit on the fly
|
Re:JUST PURCHASED
correct, but you can data log in real time without an emulator then go back and look at the graphs and make the changes, reburn the chip, and do it again. start reading up on the uberdata forum, you're going to have a lot of questions once you start and they will be better answered there.
|
Re:JUST PURCHASED
Blake's working on RTP as we speak. He's actually looking for vounteers to test for him.
|
Re:JUST PURCHASED
if he sends me an rtp board i'll test ;D
|
Re:JUST PURCHASED
Originally Posted by projekteg
if he sends me an rtp board i'll test ;D
|
Re:JUST PURCHASED
Originally Posted by xenocron
Originally Posted by projekteg
if he sends me an rtp board i'll test ;D
|
Re:JUST PURCHASED
wll i have recieved it but i loaded all the soft ware and it still doesnt look like the thing is working i still get a failure 64 byte fult in the flashburn application any help please
|
Re:JUST PURCHASED
make sure you d/l the software then the drivers. when you plug in the burner does it recognize it? when you open up flashburn it should say something about the hardware of something. it doesn't say error hardware not found, does it? make sure you are selecting the correct chip that you are burning/reading as well. locate chip in the furthest it'll go away from the lever and the notch at the closest end of the chip to the lever.
|
Re:JUST PURCHASED
OK got it working and installed all ok and the car flies 15. lbs. at 4000 rpm and using the (beerbongsickass), bin file very kick ass only thing is the check engine light is on and the idle is low no biggie though,,,,lots of love for the programmer on the beerbongsickass bin file , needs a little tuning and thats it,,,appreciate the help the project is complete (accept for the water injection)....
thanks cory |
Re:JUST PURCHASED
Originally Posted by THRESHOLD
OK got it working and installed all ok and the car flies 15. lbs. at 4000 rpm and using the (beerbongsickass), bin file very kick ass only thing is the check engine light is on and the idle is low no biggie though,,,,lots of love for the programmer on the beerbongsickass bin file , needs a little tuning and thats it,,,appreciate the help the project is complete (accept for the water injection)....
thanks cory |
Re:JUST PURCHASED
UD VERSION 1.6
|
Re:JUST PURCHASED
|
Re:JUST PURCHASED
thanks teg ill see if this one works
|
Re:JUST PURCHASED
i saw you posted on ud it's running good. did you get rid of the cel too?
|
All times are GMT -5. The time now is 12:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands