I have a b18b obd2 Integra that we are switching to obd1 and chipping. I would like to put in my dsm 450 injectors this weekend and I want to make sure I have everything.

I of course have the injectors, I also have a resistor box but I know that I need obd1 injector clips. I do have a whole obd1 integra fuel rail with injectors, so I'm assuming I can use parts from there. What exactly do I take from there to make the injectors fit my obd2 car? Do I have to cut the wires going to the clips and solder them onto my fuel rail then put the 450s into those 'clips'? Or is it something else

Thanks in advance!

 

The clips are for the plugs. I went to the local bone yard and removed the entire injector harness from an eclipse. I gave the guy 10 bucks and I just cut the plugs and clips off. Im soldering to my harness.

 

you won't need anything off your obd1 fuel rail, the injector clips, like he said above, are the actual clips off the wiring harness.