ill pay you $5 for directions on the obd0-obd1 conversion harness.....
 

ok this is horrible, i bought a jkobd obd0-obd1 conversion harness from a member here on hmt....its new but he didnt have the instructions......so i have a harness with 10 wires i need to put on my crvtec.......i know what needs to get wires, but no idea which color wires to each......if someone has a diagram or a pic of jkobd instructions that would be VERY helpful......---- ill paypal you $5 just to hook me up.......

im puttin the motor in tomorrow morning and this is all i need to do lol.....

thanks everyone

Re: ill pay you $5 for directions on the obd0-obd1 conversion harness.....
 

You don't need a "jkobd" wiring diagram, you need a diagram for whichever side of the harness has the wires hanging out of it.

...which side, OBD0, or OBD1?

Re: ill pay you $5 for directions on the obd0-obd1 conversion harness.....
 

ya im looking for a pinout of a p28 right now......the wires are mid way through the harness, but they would be for the obd1 side, its for the o2, vtec, dizzy etc

Re: ill pay you $5 for directions on the obd0-obd1 conversion harness.....
 

you can look at kurt obd0 - obd1 write up on http://www.pgmfi.org/twiki/bin/view/...KurtsOBD0-OBD1 for an idea. I think it should be almost the same.

D14 --> o2 sensor
A4 --> Vtec solenoid
D6 --> Vtec pressure switch

For the distributor, try first to match up the color for obd1 plug to obd0 plug on the 7 plug, make sure you don't confuse the fat white wire with the thin white wire. If this doesn't work then you should match up the sensor function for the dizzy in between the two (this is how I did mine).

Re: ill pay you $5 for directions on the obd0-obd1 conversion harness.....
 

ok thanks, for the dizzy i just sucked it up and bought the rywire adapter plugs, it was nice to just plug in.....but do i need to add any?

Re: ill pay you $5 for directions on the obd0-obd1 conversion harness.....
 

Just ask JK to forward you the instruction sheet. If I had mine with me (at my garage) I would scan it and post it.

Just email him.

sales@jkobd.com

Re: ill pay you $5 for directions on the obd0-obd1 conversion harness.....
 

Re: ill pay you $5 for directions on the obd0-obd1 conversion harness.....
 

thanks, i taked to jk and got it all figured out......started perfectly, but a guy i know who put it together is a douche and put the hg on upside down so all my oil spilled out in 20sec......fixing it tomorrow lol