HomemadeTurbo - DIY Turbo Forum - how to read boost with S-afc

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - how to read boost with S-afc (https://www.homemadeturbo.com/engine-management-10/how-read-boost-s-afc-21698/)

pa2play

06-08-2004 06:29 PM

how to read boost with S-afc

Ok, I think I put it on 1-channel and put it under pressure, but how doI convert that +press into boost?

theebluecrx

06-08-2004 08:26 PM

Re:how to read boost with S-afc

The afc reads bar.A .05 bar =7 lbs.

pa2play

06-08-2004 11:09 PM

Re:how to read boost with S-afc

so what would 10 psi read as?

Turbo90Accord4DR

06-08-2004 11:13 PM

Re:how to read boost with S-afc

do the math your self... 14.7 is 1 on the afc... so lets say you are running .68 thats thats 9.9psi of boost

the math is afc reading (ex .68 x 14.7 = ammount of boost in psi 9.9)

All times are GMT -5. The time now is 02:24 PM.