How do you have your Innovate/Crome analog input set up?
 

Tinkering with the new LM-1.

Just wondering how other people have their voltages set up.

With some reading I found that the honda ecu unmodded reads to 3.85 volts, and a link on PGMFI suggested these voltage ranges.

0.1 = .5lambda
3.5 = 1.5lambda

You can pretty much set the innovate wherever you want, so I am wondering where everyone else has set theirs? Reason I ask is the way I am using it seems to work ok but it doesn't sync up perfectly with Crome as well as the zeitronix did, and I am kinda hoping to get it back to that quality of a match.

Oh and does anyone know which wire is which?

Red = Analog1 and White = Analog2 or vise versa?

Re: How do you have your Innovate/Crome analog input set up?
 

Volts always go St8 to NoG

Re: How do you have your Innovate/Crome analog input set up?
 

I usually use the default settings. Setting it up the way you described is probably a good idea. Even at the default settings the ecu will read up to 17.5:1

This is how i run mine. I am not using CROMEPro so I can't speak for the sync problems that you are having. The LC-1s sync up perfectly on Freelog.
0v=7.35:1
5v=22.39:1

Re: How do you have your Innovate/Crome analog input set up?
 

this all the more love i get here?

hotrex has herpes.

Re: How do you have your Innovate/Crome analog input set up?
 

i dont have any match up problems at all with mine, are your connections okay? maybe u wanna wire in a new cig lighter?

Re: How do you have your Innovate/Crome analog input set up?
 

in every car i tune, think not. what i will probably end up doing if problems persist is go alligator clips direct to the battery. the match up isn't far off at all, like i said, sometimes .1AFR, but im a ------- perfectionist.

Re: How do you have your Innovate/Crome analog input set up?
 

There is mine