how to disable launch control in crome?
i was looking around in the options i dont know if i missed it or a plug in needs to be installed or what, anyone?
trying to disable it on a tuned map and re-burn |
Re: how to disable launch control in crome?
just set it for like 10,000 rpm
|
Re: how to disable launch control in crome?
Originally Posted by ryan89crx
just set it for like 10,000 rpm
Just for fun, set it to 2000. |
Re: how to disable launch control in crome?
Originally Posted by ryan89crx
just set it for like 10,000 rpm
|
Re: how to disable launch control in crome?
hahaha what about if you set to 0? :6
|
Re: how to disable launch control in crome?
i didnt see that option, rev limit was at like 7k somthin i didnt see anywhere to set LAUNCH CONTROL lower cause it launch controls at like 3-4k
|
Re: how to disable launch control in crome?
does only crome pro have launch control options?
|
Re: how to disable launch control in crome?
no its a plugin...
|
Re: how to disable launch control in crome?
yep figured it out. why did it ask if i want to add ign retard? does that change the bin? or just asking if i want to add that feature?
|
Re: how to disable launch control in crome?
I think it means ignition retard while launch control is in use. For instance if you're holding it into the launch limit it may have the feature to retard the timing a bit while you're bouncing off that limit...takes some of the abuse off the motor while it's not under load.
|
Re: how to disable launch control in crome?
it asked while i was enabling the plugin so i dont know
|
Re: how to disable launch control in crome?
That's probably what it's for.
|
Re: how to disable launch control in crome?
crome launch control on/off switch is coded to your A/C switch.
the logic: "your not gonna race with your A/C on are you?? 8) " except this leaves me wondering what i do if i have no A/C hahah -Luke |
Re: how to disable launch control in crome?
so i took his chip out (my old car) read it saved a copy and then opened it in crome, went to plugins> jc tools whatever its called and changed his launch from 4003 to 7324 same as his rev limit, re burn, car idles really low like its gona die.. change launch control to 9k try again, same thing.
try to re write old map to chip, getting errors, mess with stupid willems burner for 20min, make new jumper wire for eeprom slot, rewrite good, orig map runs normal. its possibly it was a bad burn i guess, otherwise anyone know why it would act like that? |
Re: how to disable launch control in crome?
Originally Posted by lkailburn
crome launch control on/off switch is coded to your A/C switch.
the logic: "your not gonna race with your A/C on are you?? 8) " except this leaves me wondering what i do if i have no A/C hahah -Luke |
Re: how to disable launch control in crome?
Yeah i've wondered that too, does anyone know where to find a writeup on how to do this, my car never came with A/C, I could wire in a switch no prob but where does it need to go to?
|
Re: how to disable launch control in crome?
i would just look at the wiring diagram in a haynes or helms book. then just follow the schematic for a/c
-Luke |
Re: how to disable launch control in crome?
search pgmfi.org, i found a thread talking about it a little. it was using the basics of Uberdata, but from the way they were talking its the same concept.
here: http://forum.pgmfi.org/viewtopic.php...r=asc&start=30 http://www.puchare.com/tech/ftl/index.html |
Re: how to disable launch control in crome?
wait.. turning the ac switch on should disable it?
|
Re: how to disable launch control in crome?
Originally Posted by WTF
wait.. turning the ac switch on should disable it?
-Luke |
Re: how to disable launch control in crome?
Originally Posted by lkailburn
correct, read the logic i posted above
-Luke |
All times are GMT -5. The time now is 10:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands