how can i change injector size on a n/a map? (turbo edit)
 

i need to run n/a for a few days i have a chip burner so i can make my own maps (except for the tuning) so i wanna run a stock pm7 (or pr4) map but i will be using my blue top's (it's a long story) so how can i chage the injector sizing on a stock map??

Re: how can i change injector size on a n/a map? (turbo edit)
 

anyone care to chime in?

Re: how can i change injector size on a n/a map? (turbo edit)
 

bump cause i need to know this too. when my rebuild is done i'll run stock for a day to make sure it runs good, then i'm puttin in the injectors, ostrich, widebanc, and puttin the socket in my ecu so i can start tuning then comes the turbo ----...yessss

Re: how can i change injector size on a n/a map? (turbo edit)
 

If you can't change the injector size...should you be burning your own chips?

the injector size stuff is in the Misc tab of uberdata. :-*

Re: how can i change injector size on a n/a map? (turbo edit)
 

What bin do you have open?Stock PM6 bin will not allow injector change just open the latest one available like ng 60 code or whatever and click on properties then change it to NA add injector size and you can then import pm6 maps or whatever you want.

Re: how can i change injector size on a n/a map? (turbo edit)
 

have you tried my basemap helper?

http://www.-------------/downloads.php?page=basemapper

Need Excel...copy and paste into NG55 or possibly even NG60 code and it could be potentially close :8

Re: how can i change injector size on a n/a map? (turbo edit)
 

sweet, thanks...i must admit I didn't search at all to find that tho, sorry

Re: how can i change injector size on a n/a map? (turbo edit)
 

1st im using turbo edit, and it says you cant change injector size on a n/a map (i know how to on a boosted map)im tryin to use the pm7 or pr4 mapthanks chris (and im workin on a grip of ecu's for you also)

Re: how can i change injector size on a n/a map? (turbo edit)
 

-_-


Calculate the percent of difference between your two sets of injectors, highlight the map, right click, choose "Edit Region", and subtract that percent, click OK.