how to burn a sst 27sf256
#16
Re: how to burn a sst 27sf256
I had a chip's data get messed up from ESD when i took it out and set it under my seat (ghetto antitheft). Car barely started, ran like *** and died. Luckly I had my lappy and burned a new chip. By then I had a crowd of people, and they were like 'omg wow haxorz!' when it started on the first crank.
BTW if you pull the pin closest to the datalogging header on the 512's, it will read from the '1st most important address'. By grounding that pin, you're telling it to read the '2nd most importand address', being the 2nd half of the chip. I also figured out how to make this work with the 16-address chips, cept you're limited to 8 with a Honda. Wiring gets goofy at that point though.
BTW if you pull the pin closest to the datalogging header on the 512's, it will read from the '1st most important address'. By grounding that pin, you're telling it to read the '2nd most importand address', being the 2nd half of the chip. I also figured out how to make this work with the 16-address chips, cept you're limited to 8 with a Honda. Wiring gets goofy at that point though.
Thread
Thread Starter
Forum
Replies
Last Post
racepak
Engine Management
10
01-19-2007 10:05 PM