Highest Boost on FMU
Just wanted to see who has the highest boost on a FMU and what brand u are running just 4 fun?
thanks Paul |
Re: Highest Boost on FMU
Originally Posted by 94accordh22or
Just wanted to see who has the highest boost on a FMU and what brand u are running just 4 fun?
thanks Paul |
Re: Highest Boost on FMU
vac? what was your setup ?
thanks 4 reply |
Re: Highest Boost on FMU
Ditch that ---- and get real fuel management. For the record I wouldn't go above 5 psi. Your fuel pressures will start to go through the roof after that, and you could get an injector failure
|
Re: Highest Boost on FMU
Originally Posted by 94accordh22or
vac? what was your setup ?
thanks 4 reply |
Re: Highest Boost on FMU
I'm pretty sure some of us ran an fmu before we had real fuel managment! Anyways, 5psi, i wouldn't push it any higher or your're asking for trouble!
|
Re: Highest Boost on FMU
7 to 8 psi max, more than that are under your own risk
|
Re: Highest Boost on FMU
MY Motec standalone came with a 8:1 fmu and said it was good up to 2 bar.
|
Re: Highest Boost on FMU
7 psi all day long on an fmu, as long as you get a high pressure fuel pump, and retard base timing like 3-4* but its sensless, you could have a chipped ecu for the same cost... :-*
|
Re: Highest Boost on FMU
Originally Posted by boosted_b16
7 psi all day long on an fmu, as long as you get a high pressure fuel pump, and retard base timing like 3-4* but its sensless, you could have a chipped ecu for the same cost... :-*
|
Re: Highest Boost on FMU
thanks guys 4 all the posts good info 4 all!!
thanks paul |
Re: Highest Boost on FMU
mid 10's in 1998. pumpin regulator
|
Re: Highest Boost on FMU
10-12psi on my first ever build... an a20 accord lx-i with a 12:1fmu and 310cc injectors + 6 fish tank check valves. Manually retarded the dizzy and ran it like that with some old turbo from an audi. Idle was horrible and threw huge black gobs of smoke out the tailpipe until around 4psi. Pretty much sold the car right after that, developed a small rod knock and lasted about 3 weeks for the new owner before he broke a piston.
|
Re: Highest Boost on FMU
I've been running 7psi all day today on my 12:1 fmu setup with an inline pump,
I know my limits & its going back down to 5psi intil i decide to build a d16 with a tune. but I baby my motor in a way,I've seen too many d15's brake the dust |
Re: Highest Boost on FMU
Originally Posted by RandysSOHC
I've been running 7psi all day today on my 12:1 fmu setup with an inline pump,
I know my limits & its going back down to 5psi intil i decide to build a d16 with a tune. but I baby my motor in a way,I've seen too many d15's brake the dust |
Re: Highest Boost on FMU
Originally Posted by ifly87
pretty daring at 7psi, lol.
try 32 psi on a b16a and yes the car went to a nhra quick 16 final running low 10.40's. There is way to get fmu's to actually give alot of fuel delivery but its not very streetable in anyway. |
Re: Highest Boost on FMU
more info on that ^^^ please
|
Re: Highest Boost on FMU
i'vew ran 14 psi on a mini me and a fmu a couple times but i usually kept it around 8-9 with timming retarded
|
Re: Highest Boost on FMU
wih stock injectors?
|
Re: Highest Boost on FMU
going for 6psi with a nissan t25 on a small port toyota 4age 16v. gonna be using the stock 182cc injectors :S hoping it holds till i can afford better management. thinking about retarding timing at the dizzy a few degrees . hoping my ---- doent blow
|
Re: Highest Boost on FMU
Originally Posted by dirtygsr94
wih stock injectors?
yes with stock odb1 honda injectors |
Re: Highest Boost on FMU
Originally Posted by bitchasscracker
yes with stock odb1 honda injectors |
Re: Highest Boost on FMU
yea it idled fine i took the motor out to put in my built z6. it still ran fine the day i took it out. now it my "spare motor"
|
Re: Highest Boost on FMU
I'm using a 12:1 FMU for the moment on my 94 Accord with stock injectors and have hit about 7lbs of boost. Wished there was some way to tune my ecu for an automatic setup.
|
Re: Highest Boost on FMU
I AM running a 3-1 Vortech at up to 30 psi boost.
but its a subaru... |
Re: Highest Boost on FMU
does the number of check valves go up with the amount of boost you need to bypass????
|
Re: Highest Boost on FMU
Originally Posted by whatupdohc
does the number of check valves go up with the amount of boost you need to bypass????
----, I was only running two tetra fish tank valves and managed to get 8lbs. before I popped a CEL. Now, I put another one in, and haven't seen one yet, and have had it up to about 10lbs on occasion. :y |
Re: Highest Boost on FMU
do the check valves need to be like for a dizzy or just a crap load of small fish tank ones?
|
All times are GMT -5. The time now is 11:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands