HomemadeTurbo - DIY Turbo Forum - Help with VAFC w/ D16z6 + DSM 440's

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - Help with VAFC w/ D16z6 + DSM 440's (https://www.homemadeturbo.com/engine-management-10/help-vafc-w-d16z6-dsm-440s-68451/)

CO_CReX

10-13-2006 11:25 AM

Help with VAFC w/ D16z6 + DSM 440's

I have a D16z6 with a T25 and some DSM 440's. My question is about how much correction should I be pulling out of the 440's with the VAFC? I have it set at -30 for the first few thousand RPM's then gradually increase but I think that is a little too lean, I am very scared of detenation so if anyone could help direct me in the right direction that would be greatly appreciated.
Thank you.
:)

NBLKID

10-13-2006 11:36 AM

Re: Help with VAFC w/ D16z6 + DSM 440's

get a wideband, run extra rich or get a chipped ecu....

CO_CReX

10-13-2006 12:59 PM

Re: Help with VAFC w/ D16z6 + DSM 440's

I dont have a wideband, but I do have an air/fuel gauge. Will that work if I just run it rich?

mike94se

10-13-2006 01:25 PM

Re: Help with VAFC w/ D16z6 + DSM 440's

Yes.

Chris Harris

10-13-2006 06:50 PM

Re: Help with VAFC w/ D16z6 + DSM 440's

Read the FAQ too!

All times are GMT -5. The time now is 11:18 PM.