help with uberdata
 

alright, im a noob at this, ive done very type of engine management from hondata to afc to FMU, now i wanna do uberdata. i have a chipped ecu already, it has everything it in already. SO i bought a burner from MOATES.NET and the uber kit (got the chipped ecu after i ordered this stuff) now HOW THE HELL do i burn roms, i want to burn bbka's .bin, i downloaded uberdata 1.66 or 1.7 and i dont see anything that tells me to burn it, the burner is hooked up via usb cable. help me out people

Re:help with uberdata
 

You use Uberdata to create .bin files, and then use whatever software your burner came with to burn that onto a chip.

Re:help with uberdata
 

ooo my burner didnt come with anysoftware ??? craig at moates.net burner...

Re:help with uberdata
 

Well then you need to kick his ass for not sending it, or your own for not downloading it. Uber is just a builder, the programmer has its own software like said above. I am sure it is online though, the files are pretty small and simple.

Re:help with uberdata
 

You need this software. http://www.moates.net/zips/FlashBurn_v1_02.zip

It says right on the site. Make sure you put the chip in the last slot down, away from the locking arm and the notch in the chip points up towards the arm. Then you load the file to buffer(Which is the bin), then you program chip. If you want to blank check it first it would be a good idea. You also need to erase the chip every time you reburn.

Re:help with uberdata
 

you don't need to erase the chip before you burn, that's the beauty of 29c256 chips. you only need to erase before you burn if you're using 27c256 (with the little UV window on top)

Re:help with uberdata
 

;)