HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   HELP TACH PROBS (https://www.homemadeturbo.com/engine-management-10/help-tach-probs-43681/)

johnnc 07-31-2005 10:45 PM

HELP TACH PROBS
 
ALL RIGHT ITS A 93 CIVIC COUPE DX D15B7,I HOOKED THIS ---- HOLE TACH UP THE OTHER DAY,WELL MY CARS AT ABOUT 6500 HITING THE REV LIMIT AND MY TACH READS 3400,2000 AND THE TACH IS AT 1100,1000 AND THE TACH IS ABOUT 600,YOU GET THE PICTURE.ITs an old autometer it has black=ground, grenn=spark, white=light power red=tachpower,i have the green wire hooked up to the large blue wire coming from the dist.Power from the cruise control and ground to sheet metal.(using chrome to set rev limits)thanks for eney info

Chris Harris 07-31-2005 11:15 PM

Re: HELP TACH PROBS
 
Sounds like equipment failure...

Hellbert 08-01-2005 08:56 PM

Re: HELP TACH PROBS
 
did you clip the small black and orange (i believe are the colors) to set the tach for 4 cyl and not 6 or 8 cyl?

johnnc 08-02-2005 08:03 PM

Re: HELP TACH PROBS
 
clip what?are you talking about some sort of jumper or something??

Hellbert 08-03-2005 06:12 PM

Re: HELP TACH PROBS
 
yes, there are 2 wires that come out of the tach and go back in. i believe they are black and orange, im not positive though i dont know without going and looking. they may have gotten pushed inside yours or something? if it is like every other one ive ever wired in, yours may be different though

johnnc 08-03-2005 07:04 PM

Re: HELP TACH PROBS
 
ill go look thanks for the help


All times are GMT -5. The time now is 09:15 PM.


© 2024 MH Sub I, LLC dba Internet Brands