help please honda civic
got honda civic 91 1.4 on a carb due for a new engine but for now wolud it be possible to turbo this up who cares if it pops
|
Re: help please honda civic
Cut the exhaust manifold down to a useable size and weld a T25 on it.Then run some pipe to the air intake for the carb and silicone,jbweld the air housing till its air tight and will hold pressure.Proceed to richen the ---- out of the adjusting screw on the carb.Now at this point go inside and grab your video camera and then go blow a rod straight out the block.I would not even worry about oil lines as the motor probably will not last long enough for the turbo bearings to cook.
|
Re: help please honda civic
Originally Posted by 90dx
Cut the exhaust manifold down to a useable size and weld a T25 on it.Then run some pipe to the air intake for the carb and silicone,jbweld the air housing till its air tight and will hold pressure.Proceed to richen the ---- out of the adjusting screw on the carb.Now at this point go inside and grab your video camera and then go blow a rod straight out the block.I would not even worry about oil lines as the motor probably will not last long enough for the turbo bearings to cook.
|
Re: help please honda civic
homemade turbo site there baby :6
|
All times are GMT -5. The time now is 01:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands