HELP-Which ECU
 

:P I know I can get good help here, I have a 91 LS block with b16 pistons and balanced with a 98 intrega head with a complete crower valve train in a 1988 civic HB the ecu in it i beleive is obd0 stock, only revs to 6800 what ecu do i need to be able to rev to at least 8000 I put a friends ecu in, it came from a zc and seem to do better but wasnt set up for what I need I'm tired of ebay flakes saying that the one they want to sell me will work and it doesn't please HELP

Re:HELP-Which ECU
 

What ECU are you using right now? It sounds like a PR4 if you have a 6800RPM rev limit. With is being a PR4, you can chip it and use TurboEDIT to edit all of things you want yourself.

http://www.TurboEDIT.org The software is free. Just download it, edit away.

Re:HELP-Which ECU
 

I beleive it is stock has the light

Re:HELP-Which ECU
 

Chances are it's a PR4.. just chip it (I can do it for you if you want, e-mail me for pricing jparker@driftkids.com) then use TurboEDIT to create your own maps with your own values.

Increase rev limits, tune fuel and ignition tables.. blah blah blah.. If you cna't do that, I can burn the chip for you also and put it in your ECU and ship it back (again, e-mail for pricing).

Re:HELP-Which ECU
 

Right now i cant be without it but i do see you on here all the time and money is a little short as always. damn i like this site i've learned alot thanx for the help i'll be in contact

Re:HELP-Which ECU
 

is the head VTEC or not?

Re:HELP-Which ECU
 

i heard that the cams on the b18a flatten out at 6000 rpms and that in order to get a new ecu hatrack would need new cams and intake manifold to be able to rev higher, and that people cant even chip the pr4

Re:HELP-Which ECU
 

:(turboEF9 Iheard this yesterday from someone else about the cams and intake the same mrpenny is saying at least 1 good thang i have a b16 intake now just to get the cams $$$$ any suggestions than i"ll deal with the ecu

Re:HELP-Which ECU
 

listen mr.2 post... pr4 is very chippable.

take a look at pgmfi.org, ghettodyne.com, turboedit.org
read. learn. share. dont ------ rumors or "i thinks" w/o reading the whole post.

Re:HELP-Which ECU
 

uhm.. sounds like u are running a pm6, stock.. is the civic an Si?? is the integra head vtec or not?

Jason, pr4 is 90-91 LS ecu right? if this motor is an LS w/ b16 pistons he doesnt need to go much higher does he? (non-vtec) ?

i think we should get more details on the car's setup..

if you don't know what ecu you are running uunplug it and look ;)