helo MSD 5 question request ASAP
hey guys i got a MSD 5 today offof my friend, and im on MSD igniton.com and i got the wiring instructions on Adobe reader and im looking at them now. i under stand them, but where does the shite wire go to??
GENERAL FOREIGN CAR The following schematic is very general to import vehicles. Some systems may look different, however they function in basically the same manner. The MSD 5 can only be installed on inductive style ignitions. If you do not know if your vehicle is an inductive discharge design, connect a test light to ground, turn the key to the ON position and check for power at the coil positive terminal. DO NOT START THE ENGINE. If there is power, it is an inductive ignition. If there is no power on the terminal it is capacitive discharge and the MSD 5 cannot be installed. Note: Most foreign vehicles with fuel injection will require a Tach Adaptor, PN 8910. See page 4 for details. IM me on AOL IM ASAP my screen name is hondalowlow im gonnahook this up tomrow morning and i need to know were that white wire goes.. ill be pissed if i burn up the MSD5. |
Re:helo MSD 5 question request ASAP
u r 2 remove the coil wires from coil install the thin red to coil power and thin white to coil ground these go to the wires then the thin orange goes in place of the coil pos. and the black goes in place of the coil ground hopes this helps good luck dark ....... 8)
|
All times are GMT -5. The time now is 06:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands