What should I check it for?

 

with the ignition on it should read .45volts and wot it should be 4.5v. when my tps was messed up i was running rich as hell too andi was boggin out. just something to look at.

 

it reads like .32-.42

 

What could be causing this problem? Its driving me crazy.

 

it should be .45-.47, .32 is low. try adjusting it a bit.

 

You do mean check it on the afc sensor check correct? Also how do I adjust it? And why would it be off if it never was before?

 

you got a point there, its just something to look at. its held on with two screws, just loosen them and adjust the tps. keep an eye on the voltage with the ignition on while you move it, and youll see it changing. i just know that fixed my bogging.

 

Well. If my voltage was messed up. Wouldnt my throttle not be at 0% at idle?

 

my throttle would be at 0 at idle but at wot it only would hit about 97%. have u checked that? if its at 100 it should be ok

 

ah. yeh mine does 100%