have you tried this
With crome ftl i was reading pgmfi and found this code to put in to ajust when it disables
tools->command(control+k) type in: rom.byteAt(0x79EF) = (mph / 0.621371192 ).toFixed(0); Example: I want it to disable at 25mph. rom.byteAt(0x79EF) = (25 / 0.621371192).toFixed(0); My buddy is using my ostrich now and i dont have a burner but i was thinking if i set the ftl to 5k and the speed to 50mph at the top of second my car does about 60 could this be used as traction control??? |
Re: have you tried this
It would work if you were up to speed and could enable it only then.
There are times under 50mph during acceleration that you will want to go over 5k rpm. |
Re: have you tried this
yea i tryed it today it was allright but when i was spinning if i switched out of first the car fell on its face ill have to play with rpm
|
Re: have you tried this
Are you using CROME free or Pro?
|
Re: have you tried this
pro
|
All times are GMT -5. The time now is 12:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands