hack or uberdata?
just taking a sort of poll on what more ppl are using and what works better, im trying to decide between the too and nobdoy where i live is running either so you ppl are my only hope on some feedback.
btw : stock injectors or upgraded with uberdata |
Re:hack or uberdata?
is any more reliable than the other
|
Re:hack or uberdata?
the hack is easier to ---- with....
but it advance your timing so you might want to either retard the base timing (which kills low end power) or add a BTM on top of it. with Uberdata you need to get your ecu chipped, but basicly that`s all you need.. and you might want to buy a burner to make things easier IF you are planning to fine tune you map with a wide band. i had the same question before,i actually went out and got a VAFC and BTM, but then i sold it all and end up using Uberdata, because: 1) set hi/lo thottle position vtec on/off rpm. 2) disable o2 heater 3) disbale close loop. 4) disable knock sensor 5) set idle rpm 6) set your fuel cut rpm 7) you got yourself a shift light with different rpm in different gear 8) adjustable lanch control 9) fuel map adjust by itself according to your fuel pressure/ injector sizing input. 10) adjust timing retard per lb of boost 11) FREE data logging which record MAP/TPS/RPM/AIR TEMP ands some other stuff. also O2 reading (can be use with wide band kits) and a lot more function that i am sure others can tell you. WELL.. yea just go with Uberdata. ;D BTW, i still remember BiGWIG told me "sell the VAFC and go with UBERDATA, THEN you can talk" :P |
Re:hack or uberdata?
Clearly Uberdata. works for me.
|
Re:hack or uberdata?
Uberdata! more options, less expensive.
|
Re:hack or uberdata?
uber...used both and still using uber.
|
Re:hack or uberdata?
Originally Posted by Donald125
the hack is easier to ---- with....
but it advance your timing so you might want to either retard the base timing (which kills low end power) or add a BTM on top of it. with Uberdata you need to get your ecu chipped, but basicly that`s all you need.. and you might want to buy a burner to make things easier IF you are planning to fine tune you map with a wide band. i had the same question before,i actually went out and got a VAFC and BTM, but then i sold it all and end up using Uberdata, because: 1) set hi/lo thottle position vtec on/off rpm. 2) disable o2 heater 3) disbale close loop. 4) disable knock sensor 5) set idle rpm 6) set your fuel cut rpm 7) you got yourself a shift light with different rpm in different gear 8) adjustable lanch control 9) fuel map adjust by itself according to your fuel pressure/ injector sizing input. 10) adjust timing retard per lb of boost 11) FREE data logging which record MAP/TPS/RPM/AIR TEMP ands some other stuff. also O2 reading (can be use with wide band kits) and a lot more function that i am sure others can tell you. WELL.. yea just go with Uberdata. ;D BTW, i still remember BiGWIG told me "sell the VAFC and go with UBERDATA, THEN you can talk" :P |
Re: hack or uberdata?
i see it like this. with the hack its easy. for the timing issuee, add a ton of fuel and that solves it i ran the hack almost 2 years at 10psi plus. it works and gets the job done. the timing advance is really not that big of an issue unless your runinng too lean.i feel thats the issue with the hack, your either too lean and detonating, or pig rich and loosing some power due to that.
now im runing uberdata. i must say its nice to have a decent idle and sure it has more options but tunability sucks balls. you cant just run uberdata. youll also need tuning equipment like a widebad or your gona have to get your car dynoed and that also cost money. or you could run someone elses tuned bin an hope for the best. if you have acces to wideband or a dyno go with uber, because you will need to spend a lot of time tuning. i remember with the hack, theres only one rule, better rich than lean. uber is more complicated but better in the long run. your choice bub. |
Re: hack or uberdata?
So is it possible to download someones set-up and just run that tune? cause there's one on Xenocron's website that has the same set-up I'm going to run and the same PSI
|
Re: hack or uberdata?
you can definately do that.
|
All times are GMT -5. The time now is 10:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands