Got my Datalogging setup Going
#1
Got my Datalogging setup Going
Well after fighting with a few thing like cables and convertor I finally got my setup going.
ECU Mod
The Extra Hole is from old setups I've Tried
My CN2 Connection
ECUControl Up and Running
My DIY-WB.com Wideband setup
New Volmeter that Datalogs
Up on Screen
All together things work well. I just have to fiqure out the ECUCOntrol Time measure so I can corrispond the WB with it.
ECU Mod
The Extra Hole is from old setups I've Tried
My CN2 Connection
ECUControl Up and Running
My DIY-WB.com Wideband setup
New Volmeter that Datalogs
Up on Screen
All together things work well. I just have to fiqure out the ECUCOntrol Time measure so I can corrispond the WB with it.
#4
Re: Got my Datalogging setup Going
Thanks guys. I guess that what you get when you live in a tiny little apartment by yourself at school, and you don't want to do your home work!
It's not a DB9 conertor. Just a no-name usb datacable I bought and soilder to. I bought the DB9 connector for a few buck and went to town.
It's not a DB9 conertor. Just a no-name usb datacable I bought and soilder to. I bought the DB9 connector for a few buck and went to town.
#5
Re: Got my Datalogging setup Going
How is that DIY WB going ? I know a little bit about soldering..Seems like a good idea? Is it hard to make? What about to get working with Uber? Any thoughts or ideas? Can I pay someone to make it? :P
#6
Re: Got my Datalogging setup Going
I like the setup. I was in the process of making the 40LED display found on the site too, but I've put that to the side. It's really an easy setup to make. I had no problems with and I haven't done HUGe soildering jobs before, but was a little practiced in it. Just make sure you have an hours or so to spec the thing in and get it setup right. All the instructions for first operation and test is on the site step by step, so you can't go wrong.
The kits aren't sold assembled, but I can do it no problem for a little bit of labour. the only problem is you will still have to set it up, because the warm up time on each sensor is going to be different. But it can be built and tested up to that stage.
Buyer Beware though. When getting the PCB and parts from the guy on the site, he was a little slow, but then when it came to my parts kit for the display, I payed the man 25.00 and haven't seen anything. (that was like 4-5 months ago). It was to late to file a stike with paypal, and he has never answered my e-mails.
The kits aren't sold assembled, but I can do it no problem for a little bit of labour. the only problem is you will still have to set it up, because the warm up time on each sensor is going to be different. But it can be built and tested up to that stage.
Buyer Beware though. When getting the PCB and parts from the guy on the site, he was a little slow, but then when it came to my parts kit for the display, I payed the man 25.00 and haven't seen anything. (that was like 4-5 months ago). It was to late to file a stike with paypal, and he has never answered my e-mails.
Thread
Thread Starter
Forum
Replies
Last Post
hamburgler
Engine Management
2
07-22-2007 08:26 PM
gsrcrxsi
Engine Management
19
07-05-2005 04:20 PM
junk240sx
Forced Induction
21
01-26-2004 04:19 PM
HMT-Admin
Turbo Parts For Sale
3
10-09-2003 09:38 PM