Got DSM 450s, injectors broken :(
 

I got my DSM 450 injectors from a member on the site, but when I opened it up, 2 of the black bottom pieces on the injector were broken/missing.

Are they needed? If it's broken/missing, can I just buy the black pieces and clip them on?

Also, who can clean and flow them for a decent amount of $?
-Chuong

Re:Got DSM 450s, injectors broken :(
 

They are fine.Those platic caps are just for protection.One of my 390s was missing it as well and it was ok.

I paid $100 at RC engineering to get mine cleaned and balanced.

Re:Got DSM 450s, injectors broken :(
 

I know this has been covered.

Those black pieces at the end of the injector are not necessary. Every DSM injector I have ever seen in person had cracked caps. If they are cracked too bad I just rip them off. It doesn't affect the spray pattern. Just don't drop them after you rip them off. :-X
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Got DSM 450s, injectors broken :(
 

Won't the missing black plastic affect the seal between the injector and the manifold?
I just got DSM 390's the other day and 2 of them have the black plastic thing broken.

Re:Got DSM 450s, injectors broken :(
 

??? Not if we're talking about the same piece? It's the piece at the very end of the injector where the fuel sprays from.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Got DSM 450s, injectors broken :(
 

you should be fine. the cap is meant to protect the tip when installing or transporting.

Re:Got DSM 450s, injectors broken :(
 

I'm REALLY sorry. I'm not used to the search function on this board yet.

But thanks for helping a turbo noob and his silly questions :)

Now, how much of the stock injector seal do I have to grind off? I read in another post that someone lubed the heck out of the stock honda injector seal and jammed it in there by tightening the bolts on the fuel rail?

Only thing I'm afraid of grinding/dremeling down the seals is ovaling it out or having it not seal completely...

Thanks again for any help you can provide.

Re:Got DSM 450s, injectors broken :(
 

Just do it enough so the injector fits in the seal snugly outside of the manifold. When you put the seal in the manifold and then tighten the rail down, it will seal up.

Re:Got DSM 450s, injectors broken :(
 

Yes, that black plastic clip on the tip of the injector.

Re:Got DSM 450s, injectors broken :(
 

No, that won't affect any sealing between the manifold and the injector. The rubber seal does that.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote