http://cgi.ebay.com/ws/eBayISAPI.dll...DME:L:RTQ:US:1


thanks

 

Yes that will work but you will need to follow the POP PORT pin out to find the right wires. I did it and it works fine. www.pinouts.ru

 

what? what?

 

I've tried an ebay cable and a radio shack cable, I couldnt get either of them to work even after matching up the rx, tx, yadda yadda yadda, bought one off xenocron and SHAZZAM! it worked like a million bucks

 

im at that point myself. i got one form ebay and i cant get it to work. my colors dont match everyone elses and mine also doesnt have a sheild on it.

 

The colors don't have to match. Its the wire position that is important. The ground is the only wire you need.

 

i tried figureing out which wires to use by using a multimeter with a pinout of a usb port, but i got a connection with every pin on the usb end and every wire. some showed more resistance than others but there was no real pattern to it

 

Drivers may be your problem. A lot of people have had problems there. I have ones that I have made from radio-shack and one I found locally that Xenocron made. Both have worked well for me.

 

wow everyone here likes xenocron. anyone heard of moates.net? craigs is a good guy check him out. i tried my hand at 3 cables befor i ended up going with his hulog and first try it worked.

 

We support Chris www.------------- He is a moates dealer and he IS a sponsor, not to mention a stand up guy that stands behind what he sells.