is this a good programmer for uberdata??
 

is this a good programmer if so im going to order it soon as i get a response. thanks http://cgi.ebay.com/ws/eBayISAPI.dll...850818425&rd=1 or this one http://cgi.ebay.com/ws/eBayISAPI.dll...PcY_BIN_Stores need to know befor i purches thanks.

Re:is this a good programmer for uberdata??
 

common someone please reply :'(

Re:is this a good programmer for uberdata??
 

I use the first one myself. It seems to work just fine for everything Ihave needed.

Noone wants to answer b/c it is a pretty simple question if you ahve read stuff or used the search function like you are supposed to.

Re:is this a good programmer for uberdata??
 

For a litle extra you can get the Moates Burn1. Its a single wire USB burner and its a lot easier to use. www.moates.net

Re:is this a good programmer for uberdata??
 

looks like you won the willem. that's the one i use, works fine, but yeah, the moates is more convenient, but cost twice as much :-\

Re:is this a good programmer for uberdata??
 

ok so when i get the burner what do i have to do to burn a bin on it. is it all ready to burn chips when i get it?? or do i need other stuff to burn.?? thanks

Re:is this a good programmer for uberdata??
 

you just have to install the software on your computer, read the directions that come with the burner, and use a jumper wire between pin 3 and 31 on the burner when burning 29c256 chips.

Re:is this a good programmer for uberdata??
 

in the instructions does it say to use a jumper wire or do i have to do it for soe reason?? and does show the two pins to jump.?? thanks

Re:is this a good programmer for uberdata??
 

can you post a pic of the Jumper on pin 3 - 31 please, i wanna make sure im doin it right!

Thanks
Matt

Re:is this a good programmer for uberdata??
 

yea what he said ;)

Re:is this a good programmer for uberdata??
 

this isn't your exaxt burner, but i drew this little diagram for someone else who had the basic willem, it works the same way...

http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

Re:is this a good programmer for uberdata??
 

So you just get a wire and stick it in both pins to bridge them?

Re:is this a good programmer for uberdata??
 

yeah, only for the 29c's though, you don't have to do it with other eproms

Re:is this a good programmer for uberdata??
 

Awesome, always seems dangerous to be prodding electrical stuff wen its plugged in tho lol, do you do it wen its turned on or off?

Matt

Re:is this a good programmer for uberdata??
 

1) install software to computer
2) plug data cable in to printer port and connect to burner
3) open software and select chip type
4) set dips and jumpers on burner accordingly
5) insert chip in to burner with jumper wire
6) power up chip burner (usb)
7) i.d. test to make sure burner recognizes chip
8) load .bin in to buffer
9) blank test chip, if not blank, erase
10) program chip
11) take chip out
12) put chip in ecu
13) drive car
14) go pick up some ho's

Re:is this a good programmer for uberdata??
 

12) put chip in ecu
13) drive car
14) go pick up some ho's

8) 8) 8) 8) 8) 8) 8) 8)

Re:is this a good programmer for uberdata??
 

that was great thanks. ;)

Re:is this a good programmer for uberdata??
 

Is this something that only applies to these chip using this burner or any burner combined w/the 29c256?

Re:is this a good programmer for uberdata??
 

i think it's just the willem, but i'm not sure being as this is the only burner i've used, but i've never heard anyone mention it with other burners

Re:is this a good programmer for uberdata??
 

Which one is it on their website?

Re:is this a good programmer for uberdata??
 

Damn I wish that picture would work for me. ;)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:is this a good programmer for uberdata??
 

i have the picture at work on my puter, i must have deleted it from my wtd page, i'll post it back up monday if you really need it.