Ghettodyne VS Uberteg.......
Ok heres my dilema, At first i was doing an afc hack.. on my 91 crx si.. D16z6.. i wanted to wire to obd1 so i went and purchased the following:
Apexi Vafc = 300 450 cc dsm = 50 obd0 to obd1 harness = 150 obd1 to obd0 dizzy harness = 25 thats $525 dollars.... I realized... its a waist.. so i sold the V-AFC for same price.. i am up 300 now... Here is my deal.. Should i take the 300.. get a p28 for 100 shipped and pay uberteg 200 for his software then dish out an extra 105 for the eeprom buner and software. or... Get my pm6 Zif Socketed.. buy the eeprom burner and software for 105 total then buy a msd rpm activated switch for 90 with pills. Total spent about 210.. and use ghettodyne 2.2.. i still have the harness and dizzy i can sell for like 250 or so plus the other 90 from the vafc and spend it on something else for the car... Which works better? Should i try ghettodyne if i dont like try uberteg? or just shoot straight for uberteg? Anyone with experiences with either please post.. i have a Z6 engine and i will be running a ihi at 8psi.. nothing major i just want a smooth ride and somewhat reliable setup. |
Re:Ghettodyne VS Uberteg.......
do what you like. try to save money. thats my piece
|
Re:Ghettodyne VS Uberteg.......
all depends on what you have. LIke.. what ecu are you running, the obd0 or obd1. Then just get the matching software :)
|
Re:Ghettodyne VS Uberteg.......
the post says...
im obd0.. |
Re:Ghettodyne VS Uberteg.......
Originally Posted by asm
Ok heres my dilema, At first i was doing an afc hack.. on my 91 crx si.. D16z6.. i wanted to wire to obd1 so i went and purchased the following:
|
Re:Ghettodyne VS Uberteg.......
*sigh*
no.. its obd0, i HAVE the wiring for obd1 |
Re:Ghettodyne VS Uberteg.......
The vtec ecu would be the best to use because the pm6 doesnot have a vtec function and the additional fuel that the vtec can use.
my .02 |
Re:Ghettodyne VS Uberteg.......
Here is my hang up with Blake's sfotware..
It's ugly. :-/ Very hard to see. Mike's GUI is better. As far as functionality, rumor (yes rumor) has it that Mike's ROM has jerk transitioning through VAC (20, 10 and 0 in HG..) ..so.. |
Re:Ghettodyne VS Uberteg.......
i dont mind a little Vaccume hiccup...
hehe the car is for WOT only anyway. |
Re:Ghettodyne VS Uberteg.......
Try highlighting a large section (or custom shaped section) of the fuel (or ignition) map in Ghettodyne, right clicking, and adding 3% more fuel. Ghettodyne can't do that (yet - Mike is very busy, I imagine he'd love to do that and a million other things he has planned). Bitch bitch bitch, moan moan moan, my ----- hurts.
Both are great programs, I use them both with a distinct feeling of satisfaction. |
Re:Ghettodyne VS Uberteg.......
I haven't seen the latest versions of Blake's software..
I heard he has toned down the color scheme. Supports table an 2D maps.. which is cool. There is also a new one coming into the mix.. OBD0Edit.. by Carsten Ferry. Seems to support a terriffic amount of OBD0 ROMs. Including some of the GhettoDyne ROMs. I haven't tested to see if it supports boost, but.. it dos support George's MapHack BIN which Ghettotune_v450.bin or somesuch is based off of. |
All times are GMT -5. The time now is 06:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands