Ghettodyne Support (OBD0) - Final Version: 2.3

Closed Thread Subscribe

Thread Tools

Search this Thread

Sep 7, 2003 | 08:16 PM

#151

Dawson

0.5 BAR

Joined: Aug 2003

Posts: 140

Re:Ghettodyne 2.2.1 w/ boost officially working

so, the new 2.3 only works for civic/crx 90-91 ecu's??

Nov 9, 2003 | 07:14 AM

#152

Boosted_SiR

0.0 BAR

Joined: Nov 2003

Posts: 11

Re:Ghettodyne 2.2.1 w/ boost officially working

Quote:

Originally Posted by scarecrowX

Quote:

Originally Posted by Jobi Joba

But in France we have 98 octane fuel...

different countries have different methods of rating the octane level of fuel. is your gas RON 98 octane, or R+M/2 98 octane. if it's RON 98 octane, it's roughly the same as our R+M/2 93 octane. just making sure, i'd hate for you to go really aggressive with the ignition and not have the anti-knock properties you think you do..

and awesome job with ghettodyne. i wish i was even half that computer savvy... ghettodyne doesn't really seem ghetto enough anymore =)

You are quite right. But 98RON is available everywhere which (I've heard) is not the case in the US

see this (readable short) article for exact details

http://www.btinternet.com/~madmole/R...RONMONPON.html

Dec 8, 2003 | 12:48 AM

#153

claytonsmith

1.0 BAR

Joined: Sep 2003

Posts: 355

Re:Ghettodyne 2.2.1 w/ boost officially working

ok i've read all this. a few months ago i read over the whole ghettodyne site.. frankly.. my head is spinning...

has the updated version for DOHC motors come out yet?? and my question is... if i can acquire a 90-91 ECU, what would someone charge me to chip it with the 3000RPM limiter ( its only at under 6mph right?)and a tune for 6-7psi of boost. i'm presently pieceing together a turbo ZC project( planning to run 6-7lbs of boost at the most and 450CC DSm injectors) and the G-DYNE setup seems far superior to a FMU which i had planned to use.
i hope someone can help me out here and chip an ecu for me.. my funds are limited and ghettodyne seems to be the best bang for the buck

thanks to anyone who replies
-Clayton

Dec 10, 2003 | 08:31 PM

#154

Chris Harris

3.0 BAR

Joined: Jul 2003

Posts: 6,447

Re:Ghettodyne 2.2.1 w/ boost officially working

You are behind the times man. Read these two threads. Ghettodyne is no longer being developed but all of the efforts that went into it are...

https://www.homemadeturbo.com/forum/...threadid=10157

https://www.homemadeturbo.com/forum/...threadid=10776

Dec 11, 2003 | 01:00 AM

#155

claytonsmith

1.0 BAR

Joined: Sep 2003

Posts: 355

Re:Ghettodyne 2.2.1 w/ boost officially working

well ----.. thanks

-Clayton

Jan 13, 2004 | 11:45 AM

#156

tomcat

0.5 BAR

Joined: Jan 2004

Posts: 76

Re:Ghettodyne Support - Final Version: 2.3

i dont know if this trhead is old and done with but i need one of these chips does any one have one or could make me one

Jan 14, 2004 | 08:04 PM

#157

TurboEF9

3.0 BAR

Joined: Apr 2003

Posts: 2,260

Re:Ghettodyne Support (OBD0) - Final Version: 2.3

Ghettodyne is no longer being actively develpoed.

However, we know there are many loyal users still out there using this great program. If you have any questions, comments or concerns specifically pertaining to Ghettodyne operation, please post a new topic to the Engine Management forum.

[EDIT]
..almost forgot, still downloadable from http://www.GhettoDyne.com!
[/EDIT