ghettodyne guys and chippers got a PS9 question...
 

the 90-91 Civic EX has a PG-MPFI engine, they came with auto (PS9 ECU) and manual (PM6 ECU) trannies.... i was woundering if all the ---- you guys are doing could in any way apply to the PS9 ECU too :) and no im not kidding, im bored ::) it would be ------ sweet if the ghettodyne ---- would work with this ECU (thinking of running a Z6/Y8 motor boosted). anyway let me know whats up....

Re:ghettodyne guys and chippers got a PS9 question...
 

In addition to any of the ghettodyne things working on a PS9, the one wire vtec code I wrote will work flawlessly too. The PS9 was the targeted development platform. Ghettodyne does not yet support the one-wire code, so you'd be somewhat on your own in terms of editing fuel/timing tables.

Check on PGMFI /forums/dev/OBD0/how many times does it take blundar to get 1wire vtec working right?

good luck.

Re:ghettodyne guys and chippers got a PS9 question...
 

"The PS9 was the targeted development platform."

sorry you mean the PM6 dont you??? the PS9 is for the automatic EX...

Re:ghettodyne guys and chippers got a PS9 question...
 

no, the PS9 was the targeted development platform for the OBD0 1-wire vtec code. The auto trans lockup solenoid control circuitry is used instead for controlling vtec.

Re:ghettodyne guys and chippers got a PS9 question...
 

oh.....i will be using this WITH the auto tranny though...

Re:ghettodyne guys and chippers got a PS9 question...
 

don't put any 1wvtec roms in it if you want it to continue to run the torque converter lockup solenoid in your tranny correctly. :)

Re:ghettodyne guys and chippers got a PS9 question...
 

think i will just run a VAFC if this project ever gets off the ground...