HomemadeTurbo - DIY Turbo Forum - fuel question about dsm 450's

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - fuel question about dsm 450's (https://www.homemadeturbo.com/engine-management-10/fuel-question-about-dsm-450s-51362/)

carsrslick

12-03-2005 10:14 PM

fuel question about dsm 450's

I installed the dsm 450's with the 10watt 10ohm resistors. I put the inline resistors on the black/yellow wire on each injector and car wouldnt crank. I reinstalled the RC 310's and the car fired right up. Could the injectors be wired up wrong?

tranceminister

12-03-2005 11:09 PM

Re: fuel question about dsm 450's

What injector clips are you using? Make sure they are actually connected to the injector and make a good fit. I ended up swapping over to the DSM clips instead.

carsrslick

12-04-2005 01:25 PM

Re: fuel question about dsm 450's

im using the stock clips. I modifyied the clips and the pluged up fine. I also have the dsm clips.

EG-prince

12-12-2005 05:21 PM

Re: fuel question about dsm 450's

What fuel management are you using? If its not set up for the 450's then maybe its flooding?

All times are GMT -5. The time now is 07:26 AM.