Fuel?
 

I am putting together a homemade set up for a d16z6. If I am only gonna be running 5-6lbs. of boost do I need to upgrade fuel system or can I just put in a new fuel pump?
Also wondering do I only have to run One oil line from turbo to oil pan? And where can I buy the turbo gaskets so I can make my mounting plate for a cx manifold?

Re:Fuel?
 

http://cgi.ebay.com/ebaymotors/ws/eB...gory=undefined
Try that for the flange. As for the fuel situation, you should be fine, but do not go over that amount of boost. I'm sure you will want to crank the boost up within a couple weeks(couple days in my case) so you should actualy upgrade the fuel system. I would rather be safe than sorry.
Yes you only need one oil line from the turbo to the oil pan. You will need another one from an oil supply from the motor to the turbo. Most people tee off the oil pressure switch.




Doesn't anybody do search's anymore????
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Fuel?
 

I was gonna use a t25. But would a t3 work with my car. What would be the difference?

Re:Fuel?
 

I'm not real sure of the difference, but I think the t25 is smaller. A t3 would work just fine in your car. I have never played with a t25 so I couldn't tell you the difference.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Fuel?
 

i think the only diff is the t25 spools fast like no other ;D

Re:Fuel?
 

Upgraded fuel pump? No mention of FMU, or anything else? :/

Re:Fuel?
 

Get Hondata. Its the ----. ;D Theres nothing like full throttle shifts and launch control!!!
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Fuel?
 

I full throttle shift on an AFC and chip, and I have a launch revlimit too.

There's cheap ways of doing things if you care to take a little time. If you have the money or not enough time or just want a really slick standalone, don't let me talk you out of Hondata. You spend a LOT of time when you DIY, and it isn't for everyone.

Mon or Tues I have off, I plan on doing a nice writeup complete with pictures on one or two of several subjects: how to chip an ECU, how to use Ghettodyne for NA OBD0 (supports launch revlimit), how to use John Doe's ERM for NA OBD1 (supports launch revlimit), using LM2917 chip in a DIY circuit as an adjustable RPM switch for launch revlimit or shift light or use your imagination, DIY two/three step boost controllers, and a bunch of other stuff.

Re:Fuel?
 

k
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Fuel?
 

"DIY two/three step boost controllers"
Thats exactly what I have been looking for :o