freelog and p28
 

I am having trouble hooking freelog to a p28. I get data is just all wrong. Dose the left corner have to say p28 or can I log a p30code on a p28? I have logged a p72 with freelog and crome before so I know everything did work at one time. I did remember to cut j12.

Re: freelog and p28
 

go to forum.pgmfi.org you have to reset the way freelog does its math to calculate data. <( i forgot the easy name for it) all the info is there and the how to just go inthe freelog forum.

Re: freelog and p28
 

This??
http://forum.pgmfi.org/viewtopic.php?f=52&t=14026
So I just change my protocol?
WTF is IO ports?

Re: freelog and p28
 

yep thats it exactly but IMHO your better off using crome pro if you really wanna save $ time is money its a bitch going between 2 programs.

Re: freelog and p28
 

I used the shot out of freelog for over a year. It works good after I got it going really well and o2 readings close enough to use it works great and you can set up both programs on your screen and veiw them at the same time.

cromepro is a little easyier to tune on the fly with but imo I can get more usable info with freelog. but afr can be dead on in cromepro.

if the p28 is chipped and your running a crome bin the just choose quickdatalogger rtp in freelog and the data should be right remember to cut j12 and make sure your data cable isn't plugged in backwards at cn2.

Re: freelog and p28
 

it use to be that easy but now cui change the dataloging code in 1.5 so you have to set it up differnt

Re: freelog and p28
 

That bastard. I think he does that stuff on purpose to ---- with the cromefree+freelog users.

Re: freelog and p28
 

Probably. One day I may go crome pro or I will get around to using logworks 3. So I can log outside of the ecu.
Thanks lilpooh I will change it over and see what happens.

One question on crome pro can I purchase the program and us it as much as I want or do I have to become a dealer ----? Like Neptune.

Re: freelog and p28
 

you can use it all you want.

Re: freelog and p28
 

Even though you aren't supposed to.

Re: freelog and p28
 

What am I supposed to do. Donate a bit I take it. That wouldn’t be so bad. I just don’t want to be a dealer.

Re: freelog and p28
 

Ask the powers be.

Re: freelog and p28
 

Didn't understand what you meant. You can tune other cars but your breaking the liscense agreement if you do leaving your self in a legaly actionable position.

Re: freelog and p28
 

Ok changed the protocol still nothing. Any other ideas? The bin could be a mugan chip bin then opened on crome. Could this cause a problem.

Re: freelog and p28
 

Doubt you have a Mugen chip, more like eBay Hooligan.

When you open the eBay'd Hooligan .bin on Crome it will tell you the code base, and most of the modifiers that have been applied to the .bin. Make sure datalogging has been added. If you are stuck on running the Hooligan maps then you can copy that ---- over to a Crome base and go from there, as some of that eBay shitware is ------- wierd.

Re: freelog and p28
 

allmost anyone with a burn1 and crome free can smoke an ebay chip with little effort. the first few tunes I did were for guys running ebay chipped ecu's with old school UV chips with white stickers on then with spoon hand writen on them.
:1 nothing like being view as a tooner god by the 17-23yo crowd when their gsr or h22 suddenly runs to it's stock potential. ::)

Re: freelog and p28
 

LOL. Ya its a long and strange story. I will just copy and past or just start out fresh with crome. Ya it probably is a ebay crud .bin