found solution,please close
 

i just did a b16a swap on my 89 dx i did the vtec wiring and the injector wiring but i have no spark to my distributor,anyone has ideas to get spark to the distributor? much help would be appreciated PLEASE!!!!!!!

Re: NEED SPARK TO DISTRIBUTOR
 

Take off you cap and see if you have spark coming out of the coil. My guess would be igniter, coil or more than likely bad wiring at the distributor.

Re: NEED SPARK TO DISTRIBUTOR
 

shut up

Re: NEED SPARK TO DISTRIBUTOR
 

it could be but another i wanted to know is would there be a difference if i had the b16a distributor that came with the engine or use the si ????

Re: NEED SPARK TO DISTRIBUTOR
 

it could be a double post, ass clown

Re: NEED SPARK TO DISTRIBUTOR
 

so what motor do you have and what dizzy are you using

Re: NEED SPARK TO DISTRIBUTOR
 

i have the b16a with the original distributor it came with but i do have the si distributor laying around?

Re: found solution,please close
 

i found what my problem was....the b16a harness that was said to plug and play really wasn't i re-installed the dx harness and walla,it started!!!!!

Re: found solution,please close
 

voila

Re: found solution,please close
 

viola