Formula for moving AFR 1 point
#3
Re: Formula for moving AFR 1 point
It's not '8.6 for 450s' or ~8% for one point. :P
Depending on what point you're moving, it's all different..
Look at it like this.. from 1 to 2 is 50%.. from 2 to 3 is 33%.. 3 to 4 is 25%, they are all 'one point' but the amoutn is different.. Get my drift?
So if you're going 10 to 11.. it's 9%.. 11 to 12 is 8.3%.. 12 to 13 is 7.7%.. 13 to 14 is 7.1% 14 to 15 is 6.6%..
Bottom line.. there is no 'blanket' percent to move on AFR point. Also, Chris is right about the injector size. It doesn't matter. A percentage is a percentage. 240s.. 450s.. 1600s.. its all the same.
Depending on what point you're moving, it's all different..
Look at it like this.. from 1 to 2 is 50%.. from 2 to 3 is 33%.. 3 to 4 is 25%, they are all 'one point' but the amoutn is different.. Get my drift?
So if you're going 10 to 11.. it's 9%.. 11 to 12 is 8.3%.. 12 to 13 is 7.7%.. 13 to 14 is 7.1% 14 to 15 is 6.6%..
Bottom line.. there is no 'blanket' percent to move on AFR point. Also, Chris is right about the injector size. It doesn't matter. A percentage is a percentage. 240s.. 450s.. 1600s.. its all the same.
#4
Re: Formula for moving AFR 1 point
yup i misdirected you a bit on all this.
for whatever reason I had it stuck into my head that the little equations for figuring out what kind of % adjustments to make also used injector size up in there.
woopsie....heh.
for whatever reason I had it stuck into my head that the little equations for figuring out what kind of % adjustments to make also used injector size up in there.
woopsie....heh.
#5
Re: Formula for moving AFR 1 point
Originally Posted by ****
yup i misdirected you a bit on all this.
for whatever reason I had it stuck into my head that the little equations for figuring out what kind of % adjustments to make also used injector size up in there.
woopsie....heh.
for whatever reason I had it stuck into my head that the little equations for figuring out what kind of % adjustments to make also used injector size up in there.
woopsie....heh.
Sorry guys, I am about to try to tune my LS-T myself with 0 experience .... so I am kinda nervous .... just trying to gather as much useful info as I can before I start.
Thread
Thread Starter
Forum
Replies
Last Post
ifly87
Engine Management
11
08-14-2006 09:09 AM