is the FMU will be good on 6 to 7 PSI
on stock fuel mang and stock injector
what more do i need to run it instead of hondata Apexi (chip/air fuel) and this ---- |
Re: is the FMU will be good on 6 to 7 PSI
Run it and see what happens.
Yes, an FMU will work. It's pretty damn shitty if you ask me, but it will work. It would be a better idea to ditch the FMU (either don't buy it or sell it) and just chip your ecu. ---- Hondata, use uberdata/chrome. It's a lot cheaper and a lot safer. |
Re: is the FMU will be good on 6 to 7 PSI
chip on stock injec?
|
Re: is the FMU will be good on 6 to 7 PSI
No.
Look in the forced induction forum and click on the thread "Read here if you want to turbo your car" or something to that extent. You can get DSM 450cc injectors for about 50 bucks, and that's even cheaper than an FMU. |
Re: is the FMU will be good on 6 to 7 PSI
^^ I agree, go with something like uberdata or crome, it is cheaper and just as good if not better than hondata. An FMU will work up to 7 or so psi but i would never really rely on one at all. If you have to use one just use it for awhile and get to some type of real engine management fast. IF you are looking for an fmu i have one for sale...
|
Re: is the FMU will be good on 6 to 7 PSI
Originally Posted by Snafubmx234
No.
Look in the forced induction forum and click on the thread "Read here if you want to turbo your car" or something to that extent. You can get DSM 450cc injectors for about 50 bucks, and that's even cheaper than an FMU. it will be ok for 450cc DSM |
Re: is the FMU will be good on 6 to 7 PSI
Need to know a little more about what your plans are. Im running uberdata with 450's on a stock fuel pump. The pump shoudl be fine as long as you aren't pushing it too much. If you plan on really pushing boost and the injectors i would reccommend a new one.
|
Re: is the FMU will be good on 6 to 7 PSI
Originally Posted by JeenYus
Need to know a little more about what your plans are. Im running uberdata with 450's on a stock fuel pump. The pump shoudl be fine as long as you aren't pushing it too much. If you plan on really pushing boost and the injectors i would reccommend a new one.
|
Re: is the FMU will be good on 6 to 7 PSI
and what about resistor box for the 450cc DSM i need one ?
|
Re: is the FMU will be good on 6 to 7 PSI
|
All times are GMT -5. The time now is 02:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands