FMU AND 330cc Injector WorK foR 7 psi ?

Reply Subscribe

Thread Tools

Search this Thread

07-23-2003, 10:39 PM

tuning art

1.0 BAR

Thread Starter

Join Date: Jul 2003

Posts: 271

FMU AND 330cc Injector WorK foR 7 psi ?

Hi i have read all the FMU topic from 1 to 11 Lolz
I learn alots and i decied to run an FMU with mazda mx5 turbo injectors is the mazda injectors (satturate*)or peak and hold do i need a resistor box ? But what size of disk is best to run about 7 or 8 psi ? with stock pump can my d16 take 7 psi ? or it better off to run stock 240 cc injectors ? i really want to run AFC but it very hard to find DSM injectors and im in low buget . thanks ... any1 know where to buy FMU for cheap .... ?

07-23-2003, 10:44 PM

Sinner

3.0 BAR

Join Date: Jan 2003

Posts: 1,798

Re:FMU AND 330cc Injector WorK foR 7 psi ?

If your gonna use 330cc injectors then get an afc or fields and ditch the fmu.

Nick

07-24-2003, 12:54 PM

tuning art

1.0 BAR

Thread Starter

Join Date: Jul 2003

Posts: 271

Re:FMU AND 330cc Injector WorK foR 7 psi ?

so it bad to run 310 cc injector with FMU i don't think im going with AFC it expensive it like $ 350 and the FMU is $150 so what size of disk to used with stock injectors and pump to run 7 max ? because 310cc with FMU is too rich ?

07-27-2003, 01:04 PM

Sinner

3.0 BAR

Join Date: Jan 2003

Posts: 1,798

Re:FMU AND 330cc Injector WorK foR 7 psi ?

I'd recommend a fields controller +3XX injectors if your broke. I saw one going for 50 dollars used on honnda-tech.com. That would put your total to around 90$ if you pay 10 dollars an injector.

Nick