FMU AND 330cc Injector WorK foR 7 psi ?
 

Hi i have read all the FMU topic from 1 to 11 Lolz
I learn alots and i decied to run an FMU with mazda mx5 turbo injectors is the mazda injectors (satturate*)or peak and hold do i need a resistor box ? But what size of disk is best to run about 7 or 8 psi ? with stock pump can my d16 take 7 psi ? or it better off to run stock 240 cc injectors ? i really want to run AFC but it very hard to find DSM injectors and im in low buget . thanks ... any1 know where to buy FMU for cheap .... ?

Re:FMU AND 330cc Injector WorK foR 7 psi ?
 

If your gonna use 330cc injectors then get an afc or fields and ditch the fmu.

Nick

Re:FMU AND 330cc Injector WorK foR 7 psi ?
 

so it bad to run 310 cc injector with FMU i don't think im going with AFC it expensive it like $ 350 and the FMU is $150 so what size of disk to used with stock injectors and pump to run 7 max ? because 310cc with FMU is too rich ?

Re:FMU AND 330cc Injector WorK foR 7 psi ?
 

I'd recommend a fields controller +3XX injectors if your broke. I saw one going for 50 dollars used on honnda-tech.com. That would put your total to around 90$ if you pay 10 dollars an injector.

Nick

Re:FMU AND 330cc Injector WorK foR 7 psi ?
 

Where the hell can I get injectors for 10 bucks each?

Re:FMU AND 330cc Injector WorK foR 7 psi ?
 

I'll sell you my stock ones for $10 a piece. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:FMU AND 330cc Injector WorK foR 7 psi ?
 

they are free at the junkyard haha

Re:FMU AND 330cc Injector WorK foR 7 psi ?
 

thats the going rate in central louisiana. 10 bucks an injector if you pay for them.

Nick