Finally starting to get everything together, Could I get a hand?
Long story short, There are NO dynos within 80 miles of me, And the only 'performance' oriented places in my town are for Diesel trucks.
I am boosting my B18B1 powered 92 CX Hatch. T3/T4e .48/60 Egay turbo Intercooler/IC piping (all 2.5 inch) DSM BOV Possibly a Delta wastegate AEM UEGO Wideband T3 mani Walbro 255lph pump B+M FPR other assorted stuffs I'm picking up a Burn1, and getting my ECU chipped, what else do I need for management, or is that really about it? (I still need injectors too) |
Re: Finally starting to get everything together, Could I get a hand?
Well when you say management do you mean to tune it?
Because you could get away with having only a burner if your tuner has everything else, but honestly I would invest in a wideband regardless of whether or not you tune it yourself. But I also believe in pyrometers. |
Re: Finally starting to get everything together, Could I get a hand?
where are you located?
|
Re: Finally starting to get everything together, Could I get a hand?
Resistor box for the injectors.
P.S. there is some 2nd gen DSM 450's on D-series.org for $45. |
Re: Finally starting to get everything together, Could I get a hand?
Originally Posted by wafflesincars
Well when you say management do you mean to tune it?
Because you could get away with having only a burner if your tuner has everything else, but honestly I would invest in a wideband regardless of whether or not you tune it yourself. But I also believe in pyrometers.
Originally Posted by ifly87
where are you located?
Originally Posted by CSaddict
Resistor box for the injectors.
P.S. there is some 2nd gen DSM 450's on D-series.org for $45. |
Re: Finally starting to get everything together, Could I get a hand?
just post----- it up for a few min. i cant imagine it takes more than 50 posts or so.
|
Re: Finally starting to get everything together, Could I get a hand?
Originally Posted by PhilStubbs
just post----- it up for a few min. i cant imagine it takes more than 50 posts or so.
I'm not in that big of a rush for it, I'm sure a set will pop up here for $50 sooner or later. There are a set of Evo8 560cc injectors for 140obo on a local board, is that a decent price for those? do they need a resistor box as well? |
Re: Finally starting to get everything together, Could I get a hand?
i dont know about the resistor box, but i couldnt pay more than $100 for any OEM injectors.
|
Re: Finally starting to get everything together, Could I get a hand?
Originally Posted by PhilStubbs
i dont know about the resistor box, but i couldnt pay more than $100 for any OEM injectors.
|
Re: Finally starting to get everything together, Could I get a hand?
Originally Posted by dasfinc
I was thinking about making an offer of $100 bux, I would be buying them off of Tall Kyle for those who are familiar with him.
|
All times are GMT -5. The time now is 12:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands